JE piston identifiaction
Honda-Tech Member
Joined: Jan 2000
Posts: 6,212
Likes: 2
From: Toronto, Canada
Re: JE piston identifiaction (moe-teg)
they look like used ones.
good luck finding out exactly what they are. you need to take some measurements of the piston and dome displacment then you might get a ball park figure on what kind of compression and/or part number they are.
good luck finding out exactly what they are. you need to take some measurements of the piston and dome displacment then you might get a ball park figure on what kind of compression and/or part number they are.
Thread Starter
Junior Member
Joined: Jan 2005
Posts: 15
Likes: 0
From: Vienna, Austria, Europe
Re: JE piston identifiaction (non-VTEC)
84mm.
were in a sleeved b18c6. compression around 12...
im trying to sell them, but nobody wants to buy over here in europe.
already wrote an email to JE, but i didnt get an answer
were in a sleeved b18c6. compression around 12...
im trying to sell them, but nobody wants to buy over here in europe.
already wrote an email to JE, but i didnt get an answer
Thread
Thread Starter
Forum
Replies
Last Post