12.5@116mph !!!!!
Thread Starter
Honda-Tech Member
Joined: Mar 2001
Posts: 1,631
Likes: 0
From: Fort Mill, SC
12.5@116mph !!!!!
Went to the track last night with the turbo setup (this time didn't break an axle) I was running on 22' inch slicks, was coming off the line real slow because i didn't want to break..
R/T ....... .834
60' ........ 2.164 ( i know that sucks on slicks)
330 ....... 5.468
1/8 ....... 8.168
MPH....... 96.08
1000...... 10.628
1/4 ....... 12.584
MPH...... 116.94 ( 11psi stock block)
p.s.. with a good 60 foot and alittle better driving on my part, the car should run around 11.9 or so at about 118mph
Video will be up soon
R/T ....... .834
60' ........ 2.164 ( i know that sucks on slicks)
330 ....... 5.468
1/8 ....... 8.168
MPH....... 96.08
1000...... 10.628
1/4 ....... 12.584
MPH...... 116.94 ( 11psi stock block)
p.s.. with a good 60 foot and alittle better driving on my part, the car should run around 11.9 or so at about 118mph
Video will be up soon
Thread Starter
Honda-Tech Member
Joined: Mar 2001
Posts: 1,631
Likes: 0
From: Fort Mill, SC
Re: 12.5@116mph !!!!! (Erik95LS)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Erik95LS »</TD></TR><TR><TD CLASS="quote">but how does it go around a real track? 
nice time.
</TD></TR></TABLE>
haven't been on a real track yet, working on it
nice time.
</TD></TR></TABLE>haven't been on a real track yet, working on it
Thread Starter
Honda-Tech Member
Joined: Mar 2001
Posts: 1,631
Likes: 0
From: Fort Mill, SC
Re: 12.5@116mph !!!!! (Bbasso)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bbasso »</TD></TR><TR><TD CLASS="quote">work on signing up for Expo!
I saw first hand, the car is fast... Sounds great too </TD></TR></TABLE>
I wish i could go to the expo but i can't get off work
I saw first hand, the car is fast... Sounds great too
</TD></TR></TABLE>I wish i could go to the expo but i can't get off work
Senior Member
Joined: Aug 2001
Posts: 18,261
Likes: 0
From: USA
Re: 12.5@116mph !!!!! (fastvtecCL)
After work Monday, roll up to VIR for a couple of hours! It's just under three, Well worth the drive to make an appearence and see what goes on.
If I could not go because of work I'd go after work!
If I could not go because of work I'd go after work!
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Mar 2001
Posts: 1,631
Likes: 0
From: Fort Mill, SC
Re: (Black R)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Black R »</TD></TR><TR><TD CLASS="quote">grats keith!
22" slicks are too small for turbo - those are allmotor size!
go with a 23" or bigger!</TD></TR></TABLE>
trying to pick up some 24''
22" slicks are too small for turbo - those are allmotor size!
go with a 23" or bigger!</TD></TR></TABLE>
trying to pick up some 24''
Thread Starter
Honda-Tech Member
Joined: Mar 2001
Posts: 1,631
Likes: 0
From: Fort Mill, SC
Re: (Doostur)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Doostur »</TD></TR><TR><TD CLASS="quote">Have a traction bar?</TD></TR></TABLE>
no traction bar yet..
no traction bar yet..
Thread Starter
Honda-Tech Member
Joined: Mar 2001
Posts: 1,631
Likes: 0
From: Fort Mill, SC
Re: (Doostur)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Doostur »</TD></TR><TR><TD CLASS="quote">When are you going to start building the motor 
I know you're getting addicted haha.</TD></TR></TABLE>
i want it to stay reliable.. built motors aren't really reliable with alot of power
I know you're getting addicted haha.</TD></TR></TABLE>i want it to stay reliable.. built motors aren't really reliable with alot of power
Honda-Tech Member
Joined: Dec 2001
Posts: 18,151
Likes: 2
From: Hollywood Babylon
Re: (fastvtecCL)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fastvtecCL »</TD></TR><TR><TD CLASS="quote">
i want it to stay reliable.. built motors aren't really reliable with alot of power</TD></TR></TABLE>
id feel safer with a built motor than a stock motor on boost... but its not to say stock motors cant do well. I think there is a stock motor car very close to 9 second passes recently.
regardless sounds fun preload the drivetrain and launch the hell out of it.
i want it to stay reliable.. built motors aren't really reliable with alot of power</TD></TR></TABLE>
id feel safer with a built motor than a stock motor on boost... but its not to say stock motors cant do well. I think there is a stock motor car very close to 9 second passes recently.
regardless sounds fun
preload the drivetrain and launch the hell out of it.
Honda-Tech Member
Joined: Oct 2002
Posts: 1,191
Likes: 0
From: Youngwood, pa, usa
Re: (fastvtecCL)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fastvtecCL »</TD></TR><TR><TD CLASS="quote">
i want it to stay reliable.. built motors aren't really reliable with alot of power</TD></TR></TABLE>
<---- 5th year on a built motor(471hp). reliability isnt that bad
i want it to stay reliable.. built motors aren't really reliable with alot of power</TD></TR></TABLE>
<---- 5th year on a built motor(471hp). reliability isnt that bad
Thread Starter
Honda-Tech Member
Joined: Mar 2001
Posts: 1,631
Likes: 0
From: Fort Mill, SC
Re: (DontBlink)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DontBlink »</TD></TR><TR><TD CLASS="quote">
<---- 5th year on a built motor(471hp). reliability isnt that bad </TD></TR></TABLE>
hmmm
i might have to do that
<---- 5th year on a built motor(471hp). reliability isnt that bad
</TD></TR></TABLE>hmmm
i might have to do that
Thread
Thread Starter
Forum
Replies
Last Post