turbo motor part out. Good prices on good parts.
Thread Starter
Honda-Tech Member
Joined: Oct 2007
Posts: 75
Likes: 0
turbo motor part out. Good prices on good parts.
Name: Chris
Location: Midlothian, VA
Got a new swap and I want this car to stay reliable so I have decided not to boost my motor for now. These parts came off my single cam turbo EG hatch.
I HAVE RECIEPTS FOR EVERYTHING. DO NOT ASK ME ABOUT MY **** IF YOU HAVE NO MONEY. Installed and maintained by Dan Driskill.
(1) Borg Warner t3/t40E polished housing turbo V trim good for 300 - 480 HP. I purchased this from Terry at boostfed for $535. There is no shaft play and it does not smoke. The turbo is perfect. On my single cam I started spooling at 3k and was at 7lbs by 4200 rpms.
I'm looking to get $400
T04b Vtrim (300whp-480whp)
This unit flows 48lbs a minute
54.20mm inducer
67.60mm exducer
http://www.hondamarketplace.co...46159
(2) Tial 38mm waste gate with 7lb spring. I purchased this from Terry at boostfed for $240.
I'm looking to get $200.
(3) Dumptube fabbed by Dan driskill with 38mm flange $15 or free with the waste gate.
(4) 2.5 inch down pipe with 5 bolt flange and flex pipe. Fabbed by Dan driskill.
$40
(5) D series drag cast manifold t3/38mm purchased for $250. Looking to get $150
(6) Custom mandrel bent 2.5" exhaust, with a flow master muffler. Made for EG hatch. Looking to get $200.
(7) Greddy Profec 2 spec B boost controller. Like NEW. $225
(8) Matching Greddy Turbo Timer $60
(9) Precision intercooler $130
(10) Greddy style BOV $70
(11) shitty charge piping $40
(12) RC 550 Injectors $120
(13) Oil Feed and drain lines with fittings $50 or free with turbo
(14) Autometer Boost gauge needs new vacuum line and is missing outside trim $10
Location: Midlothian, VA
Got a new swap and I want this car to stay reliable so I have decided not to boost my motor for now. These parts came off my single cam turbo EG hatch.
I HAVE RECIEPTS FOR EVERYTHING. DO NOT ASK ME ABOUT MY **** IF YOU HAVE NO MONEY. Installed and maintained by Dan Driskill.
(1) Borg Warner t3/t40E polished housing turbo V trim good for 300 - 480 HP. I purchased this from Terry at boostfed for $535. There is no shaft play and it does not smoke. The turbo is perfect. On my single cam I started spooling at 3k and was at 7lbs by 4200 rpms.
I'm looking to get $400
T04b Vtrim (300whp-480whp)
This unit flows 48lbs a minute
54.20mm inducer
67.60mm exducer
http://www.hondamarketplace.co...46159
(2) Tial 38mm waste gate with 7lb spring. I purchased this from Terry at boostfed for $240.
I'm looking to get $200.
(3) Dumptube fabbed by Dan driskill with 38mm flange $15 or free with the waste gate.
(4) 2.5 inch down pipe with 5 bolt flange and flex pipe. Fabbed by Dan driskill.
$40
(5) D series drag cast manifold t3/38mm purchased for $250. Looking to get $150
(6) Custom mandrel bent 2.5" exhaust, with a flow master muffler. Made for EG hatch. Looking to get $200.
(7) Greddy Profec 2 spec B boost controller. Like NEW. $225
(8) Matching Greddy Turbo Timer $60
(9) Precision intercooler $130
(10) Greddy style BOV $70
(11) shitty charge piping $40
(12) RC 550 Injectors $120
(13) Oil Feed and drain lines with fittings $50 or free with turbo
(14) Autometer Boost gauge needs new vacuum line and is missing outside trim $10
Thread
Thread Starter
Forum
Replies
Last Post
