Clean Integra GSR hatchback, GT35R, 6pt roll cage, very very clean
Up is my beautiful 1994 gsr integra. Im the second owner of this car ive had this car for about 7 years now. This car has been built from top to bottom everything was done professionally. This car is garage kept and never sees rain or snow. This is a very very dangerous car and I will not sell her to anyone who I think is not gonna give this car a good home.... This Car was built by (WHIPFACTORY) Car made 554whp with stock tranny (could of made more power but wheels were spinning to much) but I replaced it with a Quaiff LSD and I have not yet dyno tuned it with the LSD but F**king thing gets very good traction now.Im running on a Neptune ECU. Its set on a dual Boost controller On the street 415hp and then of course on high boost with 116octane 554hp. Theres so much more but if you have any questions pm me or whatever you want to know only serious people please
Year: 1994 Acura Integra GSR (fully built)
---NEUKIN EQUAL LENGHT MANIFOLD (44mm and T3) OR...$550
---Garrett GT35R DUAL BALL BEARING TURBO A/R 70(excellent cond No shaft play) $1250
****including all ERl fittings and steel braided lines*****
---CUSTOM 3" DOWNPIPE $175
---DUMPTUBE $75
---TIAL 44MM WASTEGATE (10lbs Spring) $240
---TIAL 50MM BLOW OFF VALVE $250
---CUSTOM FABRICATED 3" PIPING (CLEARCOATED POLISHED BLACK)(DC2) $320 or $ 360 with cuplers and T-bolt clamps
---PRESCISION 750HP INTERCOOLER $450
---PRESCISION 1000CC INJECTORS $ 300
---PRESCISION T-BOLT CLAMPS ARE INCLUDED (with the kit)
all this Im asking for $3300 with shipping OBO but im kinda FIRM ON THIS
************************************************** ******************
---JG EDELBROCK INTAKE MANIFOLD( victorX) $280
--- 70MM THROTTLE BODY $200
---AEM FUEL RAIL $100
---AEROMOTIVE FUEL PRESSURE REGULATOR $110
---FLUIDYNE RACING RADIATOR (tapped for coolant lines for Ball bearing turbo) $300
---MSD DIGITAL 6 IGNITION (make an offer)
---NEPTUNE ECU (TUNED BY DAVE AT WHIPFACTORY)
---TURBOXS DUAL BOOST CONTROLLER $220
---255 WALBRO FUEL PUMP $100
************************************************** *********
BUILT B18C1 MOTOR CAPABLE 700+HP $$4150.00 built ready to go what a deal!!!
or will trade for a stock gsr motor + cash on your part
---THREE ANGLE VALVE JOB
---FERRERA VALVE TRAIN (SPRINGS,VALVES, RETAINERS)
---PORTED AND POLISHED
---GSR CAMS
---New SEALS
---DARTON SLEEVED BLOCK bored 2.0
micropolished and blue printed (built and assembled by Darton)
----COMETIC HEAD GASKET
---JE 9:0:1 PISTONS
---CROWER RODS
--- NEW WATER PUMP
---NEW OIL PUMP
---NEW TIMING BELT
---NEW OIL GURDLE
---NEW OIL PAN (TAPPED)
---ALWAYS RAN ON ROYAL PURPLE 20W 50
---ARP HEAD STUDS&BOLTS
************************************************** *******
$$$1200.00 and will trade for a stock tranny + cash on ur part
GSR tranny
---QUAIFE LSD
READ READ READ READ READ READ
This car is still put together and Im still driving it.Until I know that I have a buyer I will take her apart. IF YOU NEED ANY PICTURES OR VIDEOS OF ANYTHING, I CAN HAVE THAT FOR YOU BUMP FOR LOOKIN
I WILL HAVE BETTER PICS
THERES MORE BUT THATS WHAT I CAN THINK OF RITE NOW
No LOWBALLERS and keep NEGATIVE comments to urself










Modified by orangeturbogsr94 at 9:14 AM 5/13/2008
Modified by orangeturbogsr94 at 9:19 AM 5/13/2008
Modified by orangeturbogsr94 at 10:27 AM 5/20/2008
Modified by orangeturbogsr94 at 1:32 PM 6/16/2008
Modified by orangeturbogsr94 at 1:35 PM 6/16/2008
Year: 1994 Acura Integra GSR (fully built)
---NEUKIN EQUAL LENGHT MANIFOLD (44mm and T3) OR...$550
---Garrett GT35R DUAL BALL BEARING TURBO A/R 70(excellent cond No shaft play) $1250
****including all ERl fittings and steel braided lines*****
---CUSTOM 3" DOWNPIPE $175
---DUMPTUBE $75
---TIAL 44MM WASTEGATE (10lbs Spring) $240
---TIAL 50MM BLOW OFF VALVE $250
---CUSTOM FABRICATED 3" PIPING (CLEARCOATED POLISHED BLACK)(DC2) $320 or $ 360 with cuplers and T-bolt clamps
---PRESCISION 750HP INTERCOOLER $450
---PRESCISION 1000CC INJECTORS $ 300
---PRESCISION T-BOLT CLAMPS ARE INCLUDED (with the kit)
all this Im asking for $3300 with shipping OBO but im kinda FIRM ON THIS
************************************************** ******************
---JG EDELBROCK INTAKE MANIFOLD( victorX) $280
--- 70MM THROTTLE BODY $200
---AEM FUEL RAIL $100
---AEROMOTIVE FUEL PRESSURE REGULATOR $110
---FLUIDYNE RACING RADIATOR (tapped for coolant lines for Ball bearing turbo) $300
---MSD DIGITAL 6 IGNITION (make an offer)
---NEPTUNE ECU (TUNED BY DAVE AT WHIPFACTORY)
---TURBOXS DUAL BOOST CONTROLLER $220
---255 WALBRO FUEL PUMP $100
************************************************** *********
BUILT B18C1 MOTOR CAPABLE 700+HP $$4150.00 built ready to go what a deal!!!
or will trade for a stock gsr motor + cash on your part
---THREE ANGLE VALVE JOB
---FERRERA VALVE TRAIN (SPRINGS,VALVES, RETAINERS)
---PORTED AND POLISHED
---GSR CAMS
---New SEALS
---DARTON SLEEVED BLOCK bored 2.0
micropolished and blue printed (built and assembled by Darton)
----COMETIC HEAD GASKET
---JE 9:0:1 PISTONS
---CROWER RODS
--- NEW WATER PUMP
---NEW OIL PUMP
---NEW TIMING BELT
---NEW OIL GURDLE
---NEW OIL PAN (TAPPED)
---ALWAYS RAN ON ROYAL PURPLE 20W 50
---ARP HEAD STUDS&BOLTS
************************************************** *******
$$$1200.00 and will trade for a stock tranny + cash on ur part
GSR tranny
---QUAIFE LSD
READ READ READ READ READ READ
This car is still put together and Im still driving it.Until I know that I have a buyer I will take her apart. IF YOU NEED ANY PICTURES OR VIDEOS OF ANYTHING, I CAN HAVE THAT FOR YOU BUMP FOR LOOKIN
I WILL HAVE BETTER PICS
THERES MORE BUT THATS WHAT I CAN THINK OF RITE NOW
No LOWBALLERS and keep NEGATIVE comments to urself










Modified by orangeturbogsr94 at 9:14 AM 5/13/2008
Modified by orangeturbogsr94 at 9:19 AM 5/13/2008
Modified by orangeturbogsr94 at 10:27 AM 5/20/2008
Modified by orangeturbogsr94 at 1:32 PM 6/16/2008
Modified by orangeturbogsr94 at 1:35 PM 6/16/2008
Last edited by orangeturbogsr94; Jan 19, 2009 at 04:17 PM.
Trending Topics
PARTING OUT NOW SO WHOS GONNA TALK THEIR **** NOW??????
thats for the hater honda tech guys that only go on to talk their **** and never buy **** so people dont get offended if it doesnt apply to you
thats for the hater honda tech guys that only go on to talk their **** and never buy **** so people dont get offended if it doesnt apply to you
wait so are u sellin the whole car or not... if so whats the price sorry if i missed it. If its 24k i agree its steep especially with an almost identical car for sale in wisconsin for 12k... Dont know if u want trades or no but i will put up my subaru wrx wagon modified for a trade for this teg.
sorry No trades unless its something that i really like but anyways I will sell the car if bought how it is right now but I have to have a starting price at 15K OBO theres alot more to the car than what I have on here but thats just in parts. I have roll cage with swingouts and full clean black interior and 5zigen 15" rims with drag radials and much more let alone the custom orange paint..if you wanna know more pm me
Bump.. sorry for haters. Haters are people who have never built a motor like this before and have NO freakin idea how much money goes into a built of this kind.. Good luck with the sale
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spooledex »</TD></TR><TR><TD CLASS="quote">Bump.. sorry for haters. Haters are people who have never built a motor like this before and have NO freakin idea how much money goes into a built of this kind.. Good luck with the sale</TD></TR></TABLE>
WOW... is this a serious comment??
Anyways, GL with your sell. always like to see built turbo mtrs (sad to see them f/s though)
WOW... is this a serious comment??
Anyways, GL with your sell. always like to see built turbo mtrs (sad to see them f/s though)
how much is the car? plz email me back at pvang7@gmail.com



well at least for me
