delete


Modified by gsle3per03 at 6:03 PM 5/11/2008

 

someones getting bashed

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gsle3per03 &raquo;</TD></TR><TR><TD CLASS="quote">looking for a new/used wooden bat. i gotta roll my fenders soon.</TD></TR></TABLE>

sounds like when you buy the bat.....you're gonna wack them down and jack them....GTA style.

what about a breaker bar with cloth on it?

 

BUMP FOR A WEAPON OF CHOICE TO PWN THEIVES!
i mean.. to roll fenders =P

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pho dac biet &raquo;</TD></TR><TR><TD CLASS="quote">someones getting bashed </TD></TR></TABLE>

thieves hopefully!!<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Apathy47 &raquo;</TD></TR><TR><TD CLASS="quote">

sounds like when you buy the bat.....you're gonna wack them down and jack them....GTA style.

what about a breaker bar with cloth on it?</TD></TR></TABLE>

or vice versa


the breaker with cloth idea doesn't sound like a bad idea.


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vincentek9 &raquo;</TD></TR><TR><TD CLASS="quote">BUMP FOR A WEAPON OF CHOICE TO PWN THEIVES!
i mean.. to roll fenders =P</TD></TR></TABLE>

werd!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gsle3per03 &raquo;</TD></TR><TR><TD CLASS="quote"> the breaker with cloth idea doesn't sound like a bad idea. </TD></TR></TABLE>

tell me how it goes, I need to roll my fenders to.

but then again, it's wood versus metal....wood to metal or metal to metal. iono

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Apathy47 &raquo;</TD></TR><TR><TD CLASS="quote">tell me how it goes, I need to roll my fenders to.

but then again, it's wood versus metal....wood to metal or metal to metal. iono </TD></TR></TABLE>

me too, you wanna go half and half on the fender roller rental apathy?

 

go to spoka's pad.... and/or hammer that ****!

 

how much?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Opossum Jenkins &raquo;</TD></TR><TR><TD CLASS="quote">go to spoka's pad.... and/or hammer that ****! </TD></TR></TABLE>

what's at spoka's?

hammering was my next option but seems riskier. i can't aim

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Opossum Jenkins &raquo;</TD></TR><TR><TD CLASS="quote">go to spoka's pad.... and/or hammer that ****! </TD></TR></TABLE>


spoka has a fender roller? i tried to hammer it..... i didn't have the heart to do that to my teg

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Apathy47 &raquo;</TD></TR><TR><TD CLASS="quote">how much? </TD></TR></TABLE>

$50 for the rental, but you gotta leave a $300 deposit

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Opossum Jenkins &raquo;</TD></TR><TR><TD CLASS="quote">go to spoka's pad.... and/or hammer that ****! </TD></TR></TABLE>

thats what i did to mine but i didn't heat up the left fender enough before hammering and got some nasty chippage.

they got rolled ALL the way but be careful if you choose that method.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gsle3per03 &raquo;</TD></TR><TR><TD CLASS="quote">i can't aim </TD></TR></TABLE>

you must be horrible with the ladies.



<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by frontwheelfanatic &raquo;</TD></TR><TR><TD CLASS="quote">$50 for the rental, but you gotta leave a $300 deposit</TD></TR></TABLE>

oh I remember seeing that thread, well if you're familiar with using it, then maybe.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EKDee &raquo;</TD></TR><TR><TD CLASS="quote">

thats what i did to mine but i didn't heat up the left fender enough before hammering and got some nasty chippage.

they got rolled ALL the way but be careful if you choose that method.</TD></TR></TABLE>

got any techniques or just hammer that shiet? paint chip on the inner lip doesn't matter. i'll be putting the rubber trim back on.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Apathy47 &raquo;</TD></TR><TR><TD CLASS="quote">

you must be horrible with the ladies.



oh I remember seeing that thread, well if you're familiar with using it, then maybe.

</TD></TR></TABLE>

dangerous

yeah i posted on that thread but he works in irvine and lives in fountain valley or something. with gas prices, man i ain't down to drive all the way over there

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Apathy47 &raquo;</TD></TR><TR><TD CLASS="quote">you must be horrible with the ladies.



oh I remember seeing that thread, well if you're familiar with using it, then maybe. </TD></TR></TABLE>


how hard could it be????<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gsle3per03 &raquo;</TD></TR><TR><TD CLASS="quote">got any techniques or just hammer that shiet? paint chip on the inner lip doesn't matter. i'll be putting the rubber trim back on.</TD></TR></TABLE>

if you chip the paint you'll have exposed metal and risk rust damage if you don't primer it back up

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gsle3per03 &raquo;</TD></TR><TR><TD CLASS="quote">with gas prices, man i ain't down to drive all the way over there </TD></TR></TABLE>

Hybrids FTW.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by frontwheelfanatic &raquo;</TD></TR><TR><TD CLASS="quote">how hard could it be????</TD></TR></TABLE>

heh, looking at the pictures, it seems simple enough.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gsle3per03 &raquo;</TD></TR><TR><TD CLASS="quote">dangerous

yeah i posted on that thread but he works in irvine and lives in fountain valley or something. with gas prices, man i ain't down to drive all the way over there </TD></TR></TABLE>

if you get a group of people willing to have a fender rolling party it's worth it. i figure i get 3-5 people pitch in and it ends up only costing every one $13-$25 each to get there fenders rolled, and that includes everyone chipping in for gas for someone to pick it up and return it

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EKDee &raquo;</TD></TR><TR><TD CLASS="quote">

thats what i did to mine but i didn't heat up the left fender enough before hammering and got some nasty chippage.

they got rolled ALL the way but be careful if you choose that method.</TD></TR></TABLE>

rolling w/ baseball bats and/or hitting w/ hammer obviously will chip your paint but imo i think if u use a temperature gauge and a bat or roller then that is the best method..i forget the degree but something like 150 and u are good to go at it but expect minimal chipping either way u do it then just touch it up after so the bare metal won't rust

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by frontwheelfanatic &raquo;</TD></TR><TR><TD CLASS="quote">if you get a group of people willing to have a fender rolling party it's worth it. i figure i get 3-5 people pitch in and it ends up only costing every one $13-$25 each to get there fenders rolled, and that includes everyone chipping in for gas for someone to pick it up and return it </TD></TR></TABLE>

sounds good.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Opossum Jenkins &raquo;</TD></TR><TR><TD CLASS="quote">

rolling w/ baseball bats and/or hitting w/ hammer obviously will chip your paint but imo i think if u use a temperature gauge and a bat or roller then that is the best method..i forget the degree but something like 150 and u are good to go at it but expect minimal chipping either way u do it then just touch it up after so the bare metal won't rust </TD></TR></TABLE>

he knows the method.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Opossum Jenkins &raquo;</TD></TR><TR><TD CLASS="quote">

rolling w/ baseball bats and/or hitting w/ hammer obviously will chip your paint but imo i think if u use a temperature gauge and a bat or roller then that is the best method..i forget the degree but something like 150 and u are good to go at it but expect minimal chipping either way u do it then just touch it up after so the bare metal won't rust </TD></TR></TABLE>

yup i got a heat gun for that

 

lol..correction: bat/roller, temp gauge,6pack and heat gun lol

 

hasback:

 

BUMP

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Opossum Jenkins &raquo;</TD></TR><TR><TD CLASS="quote">lol..correction: bat/roller, temp gauge,24pack and heat gun lol</TD></TR></TABLE>

now its fixed


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Apathy47 &raquo;</TD></TR><TR><TD CLASS="quote">hasback:

</TD></TR></TABLE>

i'm down to do it that way if you are apathy