Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD
1) This is for Race Car parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and I will delete it.

3) you are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, all your posts in the FS sticky will be deleted

4) NO WTB ADS!

5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE

We will delete any BS we feel does not belong in here.

 

I have a brand new never used Turbo Elements T-4 topmount with a matching stainless 4" downpipe for a B-series. Flanged for a Tial 44. Pics can be seen here and will get actual pics if needed:
http://www.turboelements.com/i...Id=83

$750.00 shipped for everything

manifold and downpipe is $1150.00 new from Turbo Elements

[IMG][/IMG]

 

I am selling all of my stuff. Prices are negotiable. No trades accepted.]

(1) 50mm Tial BOV *never used - $225


(1) Borg-Warner S378 turbo *never used

(2) 15x9 Welds w/28" M/T tires on them *~5 passes on them- $775


1600cc fuel injectors *never used - $350


Powertrain Control Solutions Dashlogger - $750


Hallman manual boost controller - $60


Shipping and PayPal fee not included in price.


Modified by Axle at 7:49 PM 5/4/2008

 

!!!Garage Sale!!!

If interested in anything please contact me via PM. Thank you!


B18C1 P72 bare head and valvecover. Comes with cam caps and bridges. (No followers, valves, springs or retainers) good condition. $300.00





Ferrea Roller Followers $700.00




Crane cams roller camshafts (Turbo grind) $500.00



AEM plug and play EMS #30-1040. Application chart http://www.jazzproparts.com/Pr...Specs (has been modified for use with T1 cam trigger. Can be returned to stock simply sending to AEM. Great customer service). 50% discount off retail! $600.00



AEM wideband oxygen sensor $200.00



S80 GSR hydraulic transmission, no grinds, 1-5 gears, reverse gear and synchros included. No differential or final drive $350.00





Circuit Worx Final drive 4.72, only 5 passes on it, like new! $600.00




B series intermediate shaft 99 CRV $50.00



Edelbrock 65mm throttle body $200.00





Skunk2 dual valve springs $125.00
Skunk2 titanium retainers $125.00



AEM universal fuel pressure regulator $100.00



CBR ignition coils with wire harness (for coil on plug ignition system, distributorless) $75.00




Powermaster 16v battery, like new condition $140.00



Powermaster 16/12v digital battery charger $200.00



GM boost controller solenoid with wire harness $30.00



AEM 5 bolt cam gear $60.00



Moroso rocker switch panel $55.00




Hasport custom machined solid motor mounts. For B-Series into EF chassis. Rear mount and driver side mount only. One of a kind! $125.00




Autometer ultralite oil pressure gauge 2 1/16", Electric (sender included) $35.00



AEM 3.5bar (50psi) MAP sensor with wire harness $100.00



95 GSR intake manifold air temperature sensor $20.00



95 GSR coolant temperature sensor $20.00



95 GSR knock sensor $35.00



B series starter $75.00



Hondata heatshield intake manifold gasket $50.00




Mr Gasket copper exhaust manifold gasket B-series head $30.00



used Cometic head gasket (usable condition) $45.00



Simpson Platinum 5 pt harness (dated March 07) $75.00




Sparco grip pedals, new condition $50.00



Bieffe predator helmet size medium (SA2000 safety rating) - $225.00
shield has been mirror tinted. Few small nicks that have been touched up.





[B]Sparco 5 firesuit, size euro 54, color white/blue trim, SFI 3-2A/5 rated - $445.00
link to Sparco sizing chart http://sparcousa.com/resourceFiles/29.pdf[/B]





Sparco Top 2 race shoes, size euro 43 (US 9.5-10), color black- $125.00




[B]Sparco GP2 race gloves, size euro 9 small, color black/grey- $65.00
Sparco sizing chart link http://sparcousa.com/resourceFiles/17.pdf[/B]



Modified by msmotorsports at 10:40 PM 5/15/2008


Modified by msmotorsports at 12:08 AM 5/17/2008


Modified by msmotorsports at 7:06 PM 5/29/2008


Modified by msmotorsports at 8:12 PM 5/29/2008


Modified by msmotorsports at 8:15 PM 5/29/2008

 

2.3Liter 50mains setup

freshly CYRO TREATED H23 crank
H23 rods
ARP rod bolts (new)
JDM TYPE-S pistons (new)
OEM RINGS ( new )
ACL bearings (new )

$550 just got the crank treated thru ALLMOTORRANDY

 

I got a brand new set of full-race traction bars. Unopened in the box. I got another set sponsered to me so i don't need these. They retail for 449.00. Reduced Price now $300



Modified by slow *** si 1 at 2:13 AM 5/23/2008

 

FOR SALE:
This fuel setup is practically brand new. It was used for less than 1 total hour of running time on a track car that made around 15 passes. I have listed retail pricing next to each item and my seperate asking price, but I would rather sell as a whole kit.

-Aeromotive A1000 Fuel Pump ($300+) asking $240
-Aeromotive -10 100 Micron fuel Filter ($100) asking $75
-15' Stainless Braided Fuel Line w/ Hose Ends ($150+) asking $100 w/ fittings
-Necessary Fittings ($60+)

I am asking $380 including paypal fee+shipping. But I will entertain reasonable offers.

If interested pm or email me iconz116@hotmail.com Pictures can be had through email as well.

$380 paypal'd + shipping

 

updated as of 5-24-08

* thumbs are clickable !


* OMC coils (coil on plug) with bracket
- fits b series vtec heads
225.00 + shipping











*obd2b to obd2a jumper harness
150.00


-




*AEM 1020 (obd2a)
- setup for hall sensor (T1 trigger or AEM EPM)
- comes with serial cable and the latest software
900 shipped




* B16 block with crank. block has some messed up holes where driver side mount bolts on, can be fixed. 75.00 + shipping










* Billet Aluminum shock tops from Strange Engineering50 shipped


* Circuit worx 4.7 final drive for b16/ls trans 500 shipped




* Crane Ignition HI-6 with LX-91 External Coil 250.00



* Skunk2 Intake Manifold (fits b16/b17/ITR) 150.00



* Str sparkplug cover 75 shipped



* Greddy TVVC Boost Controller 200.00 the most bad *** manual boost controller ever !





* eibach front and rear sway bar kit with endlinks etc, i belive its everything for installation. 250.00










* Autometer 3 3/4inch Sport Comp Tach, with mounting bracket 75.00 shipped






_______________________________________________

<U>Innovative mounts for EG chassis</U>

* anodized black, billet aluminum mounts with the grey "race durometer"

Brand NEW

350.00 shipped



__________________________________________________ ___

Oil Catch can
80 shipped
* fits 1-3/8 filter
* -12 an male bung
* 1/4npt drain/plug










__________________________________________________ __________

10 inch tall coil springs
* fits 2.5inch shock
* 350lb rate
50 shipped





__________________________________________________ __




Modified by DaveF at 7:27 AM 5/24/2008

 

fully built gsr race head crower springs and titanium retainers. ferrea valves, 5 angle valve job, cnc ported head. setup for big boost $1200 firm.




sleeved gsr shortblock, 84.5mm arias low compression pistons, forged eagle rods, calico coated race bearings, La Performance sleeves. arp head studs, and arp main studs. The block was professionally built by Lawless Engines. $2000 firm

 

Looking to sell or trade! <FONT SIZE="4"><FONT COLOR="red">Asking $6500 </FONT></FONT>

1993 Honda Civic Race Ready Shell! Drop in your swap and go racing!

Has gone 10.21@142mph

MB Fiberglass front clip
Custom pearl/air brushed paint over $6g's in paint work.
4130 Chromoly tig welded cage
Custom traction bars
Lexan windows
Simpson parachute with custom mount and lever
Custom 4130 Chromoly wheelie bars
Tokico drag suspension
Brembro brakes
SDS Engine management. Crank triggered set up. Includes all sensors and coils.
Moroso switch panel
Moroso fuse panel
Moroso fuel cutoff
Custom wiring and relays
PLX Devices datalogging wideband
Momo Seat
Momo Suede steering wheel
Momo hub
Simpson harness
Full Autometer gauages water,oil,volt,tach,shift light, boost
Rci 3gallon fuel cell
Aeromotive A1000 fuel pump
Aeromotive filter
Aeromotive fuel pressure regulator
Autometer fuel pressure gauge
Earls AN fittings
Earls -8 feed and -6 return lines.

I'm sure there is more...

Great for a weekend racer or update it for Hot Rod. Car is located in Minnesota. Delivery in the lower 48 available!





*Girlfriend not included.*

<FONT SIZE="4"><FONT COLOR="red">Asking $6500 with all of the above listed. </FONT></FONT>

<FONT SIZE="3"><FONT COLOR="black">**No engine,transmission,axles,shifter,turbo setup, radiator,wheels or tires. Will be sold on steelies. Can remove anything to make it cheaper.**</FONT></FONT>

 

<FONT COLOR="red"> All pricing + shipping

Misc fittings:


Precision Black -10an 90 degree Hose end $15.00 each
XRP -10an straight hose end $10.00
Precision black -6an hose end 45 degree $ 8.00
XRP Male weld on -10an steel $2.00
Aeroquip PN# FBM2163 $5.00
XRP -12an union male/male $5.00
XRP 1/16" Plug $1.50

Used Simpson Parachute $75.00


Brand new Skunk2 Stage 2 B-series Cams $400.00



ARP Honda Pressure Plate Bolts $ 15.00



BDL Silver B-series Cam Gears $100.00 Pair



AEM Water Temp Gauge New $ 80.00



Single Skunk2 B-series Cam Gear $50.00



MSD Pro Cap Kit PN 82933 SOLD



Edelbrock Victor X Manifold GSR NEW $275.00



Greddy M-Spec Intercooler Core NEW $ 175.00 34.5x11x3 2.5" in/out

</FONT>





Brand new with TPS $275.00 shipped OBO

 

I have a 2.2 (2224cc) B-Series (85mm X 98mm) Long Block
very low miles (maybe 5 Hours on it)
Includes:
Castillo's 98mm B20a reworked crank
CP Custom 85mm 15:1
Crane / Ferrera Roller Cam System Custom Grind (.520 lift)
AIR Intake with Bosch Blue Top Injectors setup for Methanol
Custom Cunningham Ultra-light rods
Endyn b16a Head - Flowed 301 CFM at .500 lift on PortFlow's Superflow
Golden Eagle sleeves and deck riser
ARP fasteners through out - Head Studs, Main Studs

 

gt4088r ball bering turbo used 1100 ob +shipping pm or call 787-396-9320 luis sold


Modified by siphonda at 10:41 AM 5/15/2008

 

92mm B Series Crank (LS Journals)

95mm B Series Crank (LS Journals)

89mm K Series Billet Crank (GSR Journals)

95mm K Series Billet Crank (GSR Journals)

K Series Stroker Kit:
101.6 mm Reground Castillo Crank
Custom Wiseco Pistons (14.5:1) 90mm
GPM Rods
ACL Bearings
(have a fresh G.E Block also if someone wants the entire thing)

Skunk2 Stage 2 K Series Cams

Skunk2 Stage 3 K Series Cams

K20A2 Oil Pan

K24 Destroker: (used 4 passes)
96mm Castillo Reworked crank
Wiseco Pistons
Cunningham Rods

AEM K Series EMS W/uego PNP

Type-S Throttle Body

K-Series Dry Sump:
AVIAID Stage3 Pump
Mounts
Drive pulleys and Belt
Billet Fab Oil Pan

K Series Type-S Stock injectors

K20A2 Race Head: (used)
Supertech Valves
Supertech Springs & Retainers
Full Race Port work

 

24.5x8.5x15 m&h slicks lots of life left 200bux
2- 205x50x16 nitto 555r drag radials on black subzeros uni 5x114.3 rims and tires are a 9 out 10 300 bux
msd 6al ,blaster coil,and msd wires like new 150 bux
msd rpm activated switch 30 bux
zex dry kit complete 300 bux
greddy profec type s boost controller very easy to use and works flawless!it is basically brand new with only 3 hours on it..it will come with the box and instructuos 290 bux


Modified by h22 civic at 8:37 PM 5/5/2008

 

I am parting out my SFWD civic si and everything must sell by the end of next week! so Im ready to make deals... EVERYTHING MUST GO!


Weld magnum 13" wheels with new 24.5" M/T slicks 4x100
rear 15" weld magnum one piece with new M/T DOT skinnes 4x100 1500.00 OBO.

precision GT42R 70mm with 1.01 exhaust SFWD specs 1200.00 obo

Motec m400 with every option available and mil spec harness for a b series engine 3500.00 obo

M&W single channel ignition 300.00obo

full Race top mount twin scroll manifold with twin 44mm tial flanges 1000.00 obo

2 tial 44 mm gates 275 each

precision 850 hp intercooler and custom one piece piping 800.00 obo

OMNI power front and rear drag suspension has 2 event on them 800.00obo

liberty transmission with 4.4 final drive, prodrive spool, and handcuff , fully assembled by liberty 4400.00 obo

weldon 2035 fuel pump 500.00 obo

drive shaft shop stage 5 axels 800.00 obo

aeromotive fuel pressure regulator 80.00

....... tons more parts just pm me if theres anything u might need and pm me for pics

 

Here is my list of stuff i have up for sale. if you have something you think i might be interested pm a trade offer. i have plenty of vouches in my bio so buy with confidence... So BUY BUY BUY!!!! pm me with questions.


I can ship items at buyer expense with paypal payment only + the 4% fee.
I will ship only within the US. unless I agree to ship other wise.




-Near new K-series Rc 550cc fuel injectors less than 100 miles on them $300






-K-series Crower stg 3 cams sightly used only ran on dyno and down the 1/4 mile a few times. asking $750 for cams with valve springs and retainers.

Crower Cams retails for $534.93
Crower Daul valve springs retail for $329.95
Crower Titanium Retainers retail for $191.94

PN# 63453-2 Stage 3 - Full Race
Drag Race and radical Street/Strip.
Requires #84164 spring kit and compatible ECU upgrade for optimum results.
RPM Range: 1000 to 9750+.
60+ hp over built Type-S w/ECU


Int- 310 mid Int- 249 mid Int- 502 mid

Exh-304 mid Exh-244 mid Exh-494 mid






-K-series Crower daul valve springs and retainers

 

oneFab t4 topmount bseries manifold. including tial 46mm wastegate and 4" downpipe vbanded. $1250

 

BRAND NEW AEROMOTIVE A-1000 FUEL PUMP---250+shipping
PM me if interested

 

Prices do not include shipping, If you feel the price is high, I’ll entertain reasonable offers.

GE sleeved B18C block SOLD

Crower Pro Billet rods. Brand new still in boxes, boxes are kinda beat up from sitting so long. $450


Brand New in box OEM GSR oil pump $100


GSR head with first gen Skunk2 IM. SOLD

B16 head, with IM, Missing valve cover. $400


RC 550’s with resistor box. Used for 1500 miles. $250


Silver AEM fuel rail. Used for 1500 miles. $100


Greddy catch can with hoses. Used for a few hundred miles, looks good as new. $80


x30 -10 AN fittings. Great for fuel set-ups and venting valve covers. These go for $12-$15 a piece. I'll Sell for $8 a piece.



x4 -10 aluminum weld bung. SOLDDD

AEM wideband. Barely used, Missing the sensor. I cant find the sensor as of now. $150 OBO. sensor can be obtained for fairly cheap


GM 3bar mapsensor with Pigtail. SOLDD

used OEM oil cooler. $SOLDD

New. MSD distributor cap for a GSR, MSD SS coil, with wire. $60


MSD plug wires. used for 1500 miles. $40


Autometer Ultralite Boost gauge. $30


Autometer phantom mechanical oil pressure gauge SOLD

Greddy Turbo timer. $50



Factory GSR differential BEST OFFER, I don’t think anybody even wants this.


OBD2 B-series alternator $60 a piece

Again open to REASONABLE offers.

I’m Paypal verified. Made many transactions on here, with many vouches if needed.






Modified by viet_boi_racin at 11:01 AM 5/26/2008

 

I have a few good parts for sale.

Brand new 50mm TWM K20 ITB with fuel rail and tps: $1200







Golden Eagle B-series Cam Gears 1 red and 1 blue brand new: $75 each



Odyssey PC 625 battery and charger: $100



Please IM if interested


Modified by Adam F at 4:06 PM 5/22/2008

 

I have a full set of bogart flystars FS Fronts are 13x8 with 24.5x8.5 m&h with some life left in them rears are 15x3.5 with goodyear 23x5's. 4x100 bolt pattern some light scratches but nothing crazy fronts a drilled for beadlock screws but hold air without them aswell. $900 plus shipping PM me for more detailed pics. Will also trade for equivelent in 15" 5x100, gt35r, tial bov, aem wideband, or something else interesting you may have to trade.




Also have a Precision GT4067r with a garrett 1.06 a/r hotside.$900 plus shipping PM for more pics

 

FS: OR BEST OFFER ON EVERYTHING!!!!
3" SS EXHAUST WITH VIBRANT MUFFLER 400
MADE BY: TEMPEST RACING
MADE FOR A '97 CIVIC



MORE EXHAUST PICS:
http://i169.photobucket.com/al...1.jpg
http://i169.photobucket.com/al...1.jpg
http://i169.photobucket.com/al...1.jpg
http://i169.photobucket.com/al...1.jpg
http://i169.photobucket.com/al...l.jpg

FULL-RACE PRO STREET 4-BOLT 3" DOWN PIPE 200 SHIPPED



http://i169.photobucket.com/al...1.jpg

3-BAR MAP SENSOR 50 SHIPPED



ENDYN OIL BREATHER KIT (sold to Pusse_Poppin)

FULL-RACE VACUUM BLOCK (BRAND NEW!!) 60 SHIPPED

PM ME FOR MORE INFO OR PICS OF ANYTHING. THANKS





Modified by turboed4dr at 12:56 PM 5/6/2008

 

99 GSR ring gear 4.4 ratio

99 GSR OEM diff w/ bearings no speedo gear

Can be purchased together or seporately.

 

decided it may be easier to just part my car out, than sell it as a whole

so here it goes


1.Turbo kit

Turbo (Garrett T4/T61 Ptrim)
Topmount manifold (wadeFab)
2 TiAl 38mm Wastegates w/ race valves
Downpipe (wadeFab)
Wastegate dump tubes (wadeFab)
3" Intercooler Piping (AutoLab)
Intercooler (Garrett Core w/ custom endtanks) (AutoLab)
TiAl 50mm BOV
All couplers, clamps, oil lines and brackets and gaskets


Everything you need for your B-Series turbo Project
$2400








2. Catch can setup

B16 valve cover w/ 2 -10 ports welded to it
Moroso Catch can w/ filter
-10 lines and fittings to run from the VC to the Can

SOLD





3. Wheels

Polished GSR Fat Fives
2 26" ET Streets Drag radials (50% tread)
2 195x50x15's (need to be replaced)

$200




4. Drive Train

Circuit Worx Spool
Circuit Worx 36mm axles (guaranteed never to break, EVER)
Integra hubs with 36m Wheel bearings,
Brembo rotors,
Hawk brake pads,
GSR Calipers,
ARP extended Wheel studs

Everything you need, hub to hub,

$1200

5. Engine

B16a3 Stroked to a 2.0L
ERL Darton Sleeved Super Deck 2
ERL 5 main Girdle
Clevite Bearings
LS Crank
Moroso Oil Pan
Crower Rods
JE Pistons
ARP Main Studs
ARP Rod Bolts
ARP Head Studs
Supertech Springs and Retainers
CTR Cams

$3000











6. Precision 1000cc injectors

SOLD


7. AEM Fuel rail

SOLD



8. Battery

Battery,
Summit battery Box
Moroso Kill Switch
all wiring brackets and hardware

Sale pending




9. GReddy Turbo Timer
$75




10. Pro Comp Shift Light
$50



11. MOMO Prototipo Steering Wheel
hub and brackets
SOLD




12. Car as a Shell





SOLD


MORE TO COME

Contact via
PM
Relyt7702@aol.com
or
502 905 2511


thanks alot!

Modified by SHell_ at 12:30 PM 5/8/2008


Modified by SHell_ at 10:42 PM 5/18/2008