PIC rear drag coilovers - $250
these are in like new condition, have mainly just been sitting for awhile

would prefer to not ship, but i travel the tristate area frequently so im very flexible with meeting up with someone

 

Ls head- Head is complete. Powder coated valve cover(black). Comes with KMS valve springs and titanium retainers(less than150 miles).-$325

Edelbrock Victor X intake manifold(b18b)- Powder coated in black-$225

Greddy profec B- comes with mounting bracket, solenoid, ect. $150

3 inch v-band downpipe w/heat wrap-$100


Thank You

 

Selling my used Full-Race Pro Am bar. $350 shipped comes with all the hardware and brackets as well. Pretty self explanitory, one of the best bars out right now.

 

fully built 800+whp capable gsr longblock $4000 with ITR cams and buddy club gears
benson sleeved, laskey racing shortblock
84mm 9:1 cp pistons
pauter rods
stock crank
arp head studs
applied flow technologies portwork, 5 axis cnc valvejob, reshaped combustion chambers, valve guides cut to match port, bronze valve guides no expense spared.
combustion chambers opened up to match the bore size
ferrea comp plus valves 1mm oversized
crower springs/retainers
GE overbored oem gasket

this motor retails for 7500+ new not including the core motor and cams/gears. the motor has roughly 6k miles on it. only seen race gas for one pass down the track and on the dyno.






BDL 70mm throttle body $250


new never used full race divided t4 manifold $1200


gsr victor x intake manifold $275

 

Selling my mild build setup, which is my backup motor at this time
Dynoed at 275 and 200
Everything in the motor was new from honda

Specs

K24a4 Block 87.5
13.5 JE Pistons
BC rods
Calico coated mains, rods and thrust washers
S2000 ERL Oil Pump
K24 Oil Pan




K20a Head
Ported by Portflow
Skunk oversized 1mm valves
Skunk Springs and retainers
Hytech Stage 4 intake and Stage 3 Exhaust cams
Stock K20a VTC
ARP Head Studs
Cometic Head Gasket

Motor is complete and runs, you just need to add harness and manifold

6000.00 plus shipping its yours


Marc P

 

aeromotive fuel pump voltage controller. $210 shipped.
brand new never used jg edelbrock victor X gsr intake manifold. $320 shipped.




Modified by building boost at 12:18 AM 5/23/2008


Modified by building boost at 12:19 AM 5/23/2008

 

libertys/buck02 handcuff with spacers make offer








Modified by redboost10 at 7:47 PM 5/25/2008

 

I changed my mind on my set up once again. Gas is too high and my wife likes to spend money on our house...i do too, So im keeping it simple like back in the day.

I have a set of Corwer rods. the good ones in perfect condition for a B18C..not new they have maybe 5 miles on them, just dyno.
308.00 for the rods


NIB- Enydn Rollerwave pistons 81.5 thermal coated 380.00 for the pistons



I would like to get what I have invested in them or I would be willing to trade for...

New-moroso oil pan B18C stock replacement
walbro HP fuel pump
RC saturated 750cc injectors
Wideband

Prices are not best offer I will keep them if necessary 690.00shipped

thanks

paypal is antwainehobbs@charter.net
#-817-528-8231 call anytime

 

WTT: My GSR Quaife for your B16/LS Quaife!

 

where u located whats the least u take

 

u still have them where u located let me know i need them

 

FS: H22 custom manifold w/ 3" V band downpipe.
The downpipe is already heat wrapped. All in Excellent condition. Asking $650






(plenty of hood clearance)

 

Well guys the time has come, my car is being sold! I am removing the following parts too lower the cost for the new owner.

I have the following for sale

Hondata s300 SOLD

MsD Digital 7/will come with the HVC coil.. asking 350.00

OBD2a Distributor, coil has been removed has New MSD cap and Rotor. asking 120.00

MSD wire 8.5 asking 80.00

Phantom white Autometer Water gauge...Need sending unit..20.00

PLX M250 wideband system includeds the wideband, SOLD

MOre will be added as i am cleaning out my garage now!!!

PICS will be up shortly!!


Modified by B18c1turboedEK at 6:14 PM 5/23/2008


Modified by B18c1turboedEK at 2:21 PM 5/24/2008

 

Some misc stuff I have lying aroun the garage...

MSD Digital 6 with blaster ss coil $145 shipped


MSD 6a with blaster ss coil $75 shipped


MSD 2 step controller with module $25 shipped


Crane LX 92 coil $25 shipped

2 autometer carbon fiber dual A pillar guage pods $20 shipped each


Autometer afr gauage $20 shipped

Autometer Electric Oil Pressure guage with sender $20 shipped


custom GSR sheetmetal intake manifold with bbk 62mm throttle body one section needs to be rewelded $75 shipped








Onefab b series manifold t3 manifold with 38mm wastegate and 3" downpipe.. $300 shipped. Manifold has a runner that needs to be rewelded

stock b16a2 head complete with, cams, cam gears, valve cover, aebs intake mani, vtec solenoid , fuel rail, injectors and throttle body $500 shipped.





Honda CBR600RR coil packs with harness 3 Sets $70 shipped each



Sparco Rails for 92-95 Civic, 94-01 Integra.. Driver's side and passenger's side available. $40 shipped each


Have a set of generic sliders for compatible with various seats for $40 shipped.
.


Modified by 00ITR #543 at 8:23 PM 5/27/2008

 

2000 PR3 B16 head completely stock , head is in mint condition.

Con"s:
NO throttle body , dist. or injectors.

PRO's
Has been tapped for LS-v Conversion just need the GE sandwich and line.
itake mani, cams & cam gears all included.

$400 obo
call or email
(818)470-1040
mbouch5770@aol.com


Modified by SoCalEF'in at 2:25 PM 5/25/2008

 

I am interested in the Oil cooler, sent Im

 

bnib never opened,didnt want to deal with modifying my ef chassis,my loss your gain

sold



Modified by integrated civic at 11:45 PM 5/31/2008

 

DSS Axles 3.9 $800
CC Twin Disc Clutch $800
JG GSR manifold $250
BLOX 76mm TB $200
Type R cams and STR cam gears $400
GSR Tranny with Type R LSD $800
Jim Fab Traciton Bars $200
Full Race T4 Ram horn manifold with 4'' downpipe $800
46mm Tial wastegate $300 (1Bar Spring)
Lenso's Black with studs and 24.5x9x13 M/T $450
Endyn Catch Can $80

Everything for a B-Series

Hit me up...914 557 9048
Paypal Syblue01@aol.com

 

PTE71 with billet wheel, zero miles only on car for 10 min while car was idling. selling to upgrade to something larger.




asking 1300 shipped

 

Very High quality Hitech Side exit for H22 .

4-2-1 Race Header.

$800

 

AEM 30-4100 Gauge Type UEGO Controller. Brand new in box. Sells for $250+ new. Make reasonable offer.

 

Dont want to do this, but need to sell all of the parts that I was gonna use in my H2B setup. This setup should put you in mid 11's all motor. Throw me a reasonable offer.


H23 VTEC / H2B Setup:

-H23 OEM Crank (Mic'ed and within OEM specs)
-H23 USDM Rods & Pistons

H22 Parts (All are BRAND NEW)
-Skunk2 Pro2 Cams
-Skunk2 Pro Series Springs
-Skunk2 Pro Series Retainers
-Skunk2 Pro Series Spring Seats
-Kaizen Balance Shaft Eliminator Kit
-Action 1MS Clutch Kit for B series (For H2B setup)

 

41 Series Kirkey Racing Fabrication Drag Racing Layback seat with cover. Cover is old style black cloth (old style is full cloth versus new style cloth with vinyl outside). Does not include any mounts. Mounted in a CRX but never driven in. Retails for $259. Selling for $200 local pickup/delivery.
Non-local pays shipping/packaging and paypal.
Will deliver up to 4 hours away for round trip gas + $10.

 

RC 750cc injectors asking $250 used for motor start up and 5-6 dyno pulls

 

GSR Quaife (b-series hydro) for sale- $700 + ship. Excellent condition, lifetime warranty, and impossible to find right now.