I have a bunch of extra stuff lying around after working on a few preludes and my dad's civic. I wanted to try and sell locally (Albuqueruqe, NM) before trying flea bay, etc. If you are interested in something I can be reached by PM or phone at 512 639 5315. I have not put a lot of thought into prices; I just put down some ballpark numbers. Ok here we go...

Complete Built H22A1, sleeved block, 90mm, 12:1, Type S cams, ITR LMA's, Crower Springs/Retainers, ported head and manifold, manual tensioner conversion, etc. etc. Dynoed 175 ft-lbs. SAE on stock ecu and header. $4500

Another complete, built JDM H22A Type S, 11:1, Type S cams, ITR LMA's, DPR Springs/Retainers, ported head and manifold, manual tensioner conversion, etc. etc. Dynoed 205whp on stock ecu and dented DC header. ~30k on JDM block, ~8k on rebuilt head, seals, belts, etc. $3200

M2S4 Prelude Si transmission $300
M2B4 Prelude JDM LSD transmission $800

SSR 17x7 wheels for Prelude, 4x114 38mm offset? powdercoated black. Falken Azenis 615 mounted $600

B16 block, cracked sleeve Crank, rods and 3 pistons are ok. $90

USDM 1995 B16 engine, ran great when swapped for a B20vtec in a 1995 civic del sol.

Whole bunch of msc. parts, make offers or let me know what you are looking for:

1997 Prelude:
5-lug front knuckles, suspension arms, steering rack, front crossmembers, motormounts

1993 Prelude VTEC:
doors, sunroof, trunk lid, 2x spoilers, suspension, steering rack, interior pieces, ABS, fuel tank, fuel pump, A/C pump evap, heater core and fan, brake and clutch masters, pedals, rear brakes, rear seats, seatbelts, various brackets, bolts, PS pump, crossmembers, oil pan, sensors, throttle bodies, etc.

1993 Prelude Si:
front brakes, PS pump and parts, injectors, probably some other stuff. This F23/H23 hybrid engine is for sale: $1300

https://honda-tech.com/zerothread?id=1046336

B20Z intake, header. These were pulled off a B20Z and the block went into a CR-VTEC. Best offer.

Finally, Mazda Protege BP 1.8l sohc engine longblock. Oil pan is cracked from forklift, all else looks good. $200 OBO Also have a DOHC BP head I was going to put on it for my brother's protege, supposed to add 30hp. Never got around to it. $100 OBO for the head, IM, and ECU. This engine came in a lot of cars, including Ford Escorts, Saturns, and some Miatas IIRC etc.

Thanks for looking guys.

 

Spare TBs, passenger door, front fenders, front seats, and a few interior pieces are now sold. Painted pieces are black, btw. I have one spare chipped P28 now too, $120.

 

i want that p28. is it manual? does that include shipping? CASH IN HAND!

 

P28 and Euro R manifold setup sold.

 

pm'e you about a tranny