I brought 1


Modified by nudvl at 12:21 AM 4/1/2008

 

I brought 1 and I didnt get the below


Modified by nudvl at 12:21 AM 4/1/2008

 

i have the throttle bracket
and i have a purge valve solenoid

 

NEVERMIND I got 1 already and I didnt buy this 1 ^

 

so...if i drive across town and get you some pictures you are definitely going to buy it...???
thanks
bump for a **** talker in pm's who cant speak english or uphold to his word

 

I dont know how you can say I was talking sh*t in pm's. Yes twice I said I'll send the money and thats my fault for saying that, I didnt mean to mislead you and Im sorry for that but how can you fault me for buying a cheaper, CLEANER intake manifold. I mean what would you do? Yes yours was complete and the one I bought was not but if you read, my second reply to you when we first started talking about the part:

(8:16 PM 3/30/2008) nudvl: I dont know what to offer u if i could find one around where i live it probley wouldnt cost more then $75 or more if I had to get it shipped. But it also depends on the condition of the part.

Let me say it again "IT DEPENDS ON THE CONDITION OF THE PART"!!!!

You later said:
(8:41 PM 3/30/2008) digitalcongo: i ran it for about 5k miles...
and did a complete head swap because there was hesitation problems...
the problem turned out to be an old worn timing belt.
the egr is in spec and functions correctly.
let me know if you need the injectors and fuel rail and fuel pressure regulator, intake air temp sensor, and/or idle air control valve...
i also have a brand new oem intake manifold gasket new in package from honda for it...

If you only ran it for 5K miles how did it get so dirty. I mean look at, its all dirty and rusty I would hate to see anything else of yours that you try to sell or that you have on your car. I have said it before and I will say it again!!! I was sorry for not buyin your part, Im sorry if I misled you in anyway!!! But you can keep this thread going if you want with your childish remarks and what not. But when I get my new CLEAN manifold I will post pics and let HONDA-TECH deside who is right and who is wrong! THE ONLY THING ANYONE CAN SAY IS THAT I MISLED YOU THATS ALL AND I ALREADY SAID I WAS SORRY I CANT DO MUCH MORE THEN THAT!!!!

Im so done wit dis im jus gona........

 

you think you are done with "DIS"...
you didn't ask for condition
you just cared if it was complete
and you insisted you were going to pay me for it
how many vx intakes have you seen in the past lifetime with 5k miles on them
all i said was thats how many i had on it...
the car is over 215k...but you didn't seem concerned
you just said you want it
you are clearly a child with no understanding of how to make yourself be clear.
if you said you HAD to see pics before you knew you wanted to buy it i wouldn't be so butt hurt...
but you acted like it didn't matter...
also you could have counter offered
and for the record
DIRT IS NOT PERMANENT...EXCEPT FOR THE LAZY
you are just a **** head

good luck finding all the parts for your vx intake



<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">
(1:47 PM 3/30/2008) nudvl: hey man im lookin through sum old threads. Do you still have the VX IM w/ TB & EGR valve???
(3:10 PM 3/30/2008) digitalcongo:
i have one...but am considering using it in a project...
feel free to make an offer though
(8:16 PM 3/30/2008) nudvl: I dont know what to offer u if i could find one around where i live it probley wouldnt cost more then $75 or more if I had to get it shipped. But it also depends on the condition of the part.
(8:17 PM 3/30/2008) nudvl: so you tell me how much it worth to you with shippin included
(8:41 PM 3/30/2008) digitalcongo: i ran it for about 5k miles...
and did a complete head swap because there was hesitation problems...
the problem turned out to be an old worn timing belt.
the egr is in spec and functions correctly.
let me know if you need the injectors and fuel rail and fuel pressure regulator, intake air temp sensor, and/or idle air control valve...
i also have a brand new oem intake manifold gasket new in package from honda for it...

(9:15 PM 3/30/2008) nudvl: what do u want for all of it??? do you have the TB that goes with it and do u have any pictures of it to send to me???? saiyandvl@yahoo.com
(1:03 AM 3/31/2008) digitalcongo:
i'll get you some pics if you are interested...
$80 shipped for complete intake
(1:06 AM 3/31/2008) nudvl: yes im very interested!!!!!!!! send pics to saiyandvl@yahoo.com
(1:07 AM 3/31/2008) nudvl: if you have paypal i can send money 2night
(1:59 AM 3/31/2008) digitalcongo:
sorry...pics until tomorrow...
paypal: eigerzoom@hotmail.com
i will ask for the paypal fee in addition
$83 total
(2:02 AM 3/31/2008) nudvl: post me sum good pics and ill send the money! cool with you and let me know what all ur sending please
(3:54 AM 3/31/2008) digitalcongo:
sure enough...i will get pics asap
(6:49 PM 3/31/2008) nudvl: post the pics in my thread and ill send the money
(7:50 PM 3/31/2008) digitalcongo:
going to take pics now...link me to the thread
(8:32 PM 3/31/2008) nudvl: https://honda-tech.com/zerothread?id=2264061
(9:42 PM 3/31/2008) nudvl: send me a pm 2 lemme know when u post the pics man
(11:16 PM 3/31/2008) digitalcongo:
about to post them
(11:17 PM 3/31/2008) nudvl: ok cool man hang out for a bit ill pm u when i see them cool


(11:25 PM 3/31/2008) digitalcongo:
they are up
(11:45 PM 3/31/2008) nudvl: hey man sorry for buggin you and everything but another guy that i had been talkin hit me up with a cheaper deal. again im sorry for the trouble</TD></TR></TABLE>

oh gee how convenient
why do you have to act...
grow up...be a man...and say what you mean...
and stop yanking on dudes ***** to get what you want...
i would have taken pictures either way



Modified by digitalcongo at 5:12 PM 4/1/2008

 

whatever man your right im wrong just [freak]in suck a dick!!! its just whatever!!! just LET IT GO just like ur mom always tells me before i blow my load all over her face

 

oh now we are getting somewhere...
educated move...
that should go strait to my heart and have me begging for mercy
you know the least you could do is suck it up and take it like a man
but no...you have to take it to try and take it to another level...
perhaps one where you win...and i lose...
well good luck on that...i dont play
just think about things before you blab your fingers all over your keyboard.
show some respect for yourself and you will in turn receive it.
if you dont want respect...then suit yourself...
be a useless piece...it will come back to you in the end
just think...you could
thats all i'm saying

 

nudvl (11:25 PM 4/1/2008): whatelse do you want me to say dude???? I said I was sorry I said I didnt mean to mislead you how much bigger can my ***** get before you get it!!!! I WILL SAY IT AGAIN IN MY 2ND REPLY I SAID "BUT IT ALSO DEPENDS ON THE CONDITION OF THE PART"!!!!!!!!!!!!!!!!!! this is why i just said my bad sorry for the trouble and that i was gonna buy the other part. becasue this board is full of people that swear they are right about everything. Now if u wanna TRY 2 keep insultin me we can do dat but for real ur gonna say what u wanna say and im gonna do da same its whatever i have all the time in the world to play games and like playin games!!!! JUST LET IT GO MAN

 

you suck at your own game
and you need english lessons
i cant believe a 29 year old would type like that
are you not from this country...?
are schools really that bad...?
did you graduate high school...?

 

we can do it your way.
the reason I type dis way is because im lazy, im always so tired from f*ckin your MOM. Im 29 and??? Yes I am a american born and rasied unlike u. U F*CKIN kyke &lt; i may have mispelled that but what the hell i need english lessons maybe ur mom can teach me after she gets done gaggin on my c*ck. schools are that bad in dis country because of dum F*CKS like U runnin it or just bein stupid!!!! And yes I did graduate high school because I pimped ur mom out to the teachers so I would get good grades and while I was doin all DAT I had ur mexican dad over mowin the grass at my house.

 

oh your think you are doing things my way...?