94-97 oem fogs+ intercooler=???
Thread Starter
official honda whore
Joined: Nov 2002
Posts: 8,454
Likes: 0
From: not tellin you where, pa, usa
94-97 oem fogs+ intercooler=???
well i have a 94 integra that im boosting and i picked up a set of oem foglights and i was wondering if they will fit in the bumper with an intercooler? if so does anyone have any pics? and also the dimensions of the intercooler/or pipes
Honda-Tech Member
Joined: Jul 2000
Posts: 61
Likes: 0
From: Atlanta, GA
Re: 94-97 oem fogs+ intercooler=??? (EARLdaSQUIRREL)
Unfortunately mine would no longer fit. They were too deep. The endlinks on the IC piping got in the way.
For reference I have the Full Race Stage 2 GTAC kit. I believe it uses a 22x8x3 Garrett core intercooler.
Sorry to hand you the bad news. Here is a shot of the IC...
For reference I have the Full Race Stage 2 GTAC kit. I believe it uses a 22x8x3 Garrett core intercooler.
Sorry to hand you the bad news. Here is a shot of the IC...
Honda-Tech Member
Joined: Nov 2006
Posts: 1,680
Likes: 0
From: Tuning in, KY, USA
all that money into a full race kit and you let you ic hang below ur bumper?
Anyways, I have had two ic setups on my 94 gsr, both of which fogs would not fit. My first setup has the piping openings at the bottom of the ic, dead nuts in the way. My 2nd setup had the ic openings in the middle of the ic, still in the way. So I ditched them. Different ic piping each time.
Anyways, I have had two ic setups on my 94 gsr, both of which fogs would not fit. My first setup has the piping openings at the bottom of the ic, dead nuts in the way. My 2nd setup had the ic openings in the middle of the ic, still in the way. So I ditched them. Different ic piping each time.
Thread
Thread Starter
Forum
Replies
Last Post
codenamezero
Forced Induction
4
Sep 6, 2011 03:44 PM
BoostnEK6206
Honda Civic / Del Sol (1992 - 2000)
14
Feb 21, 2008 08:46 PM
