who has them or who knows where to find them? I heard Pirate does but pm'd him and haven't heard from him

 

Todd Marcucci (marcucci) on po.com and ntpog.org has a cad file for it. I'm not sure if he makes and sells them, but a machine shop should be able to take the cad file and make it for you.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vinuneuro &raquo;</TD></TR><TR><TD CLASS="quote">Todd Marcucci (marcucci) on po.com and ntpog.org has a cad file for it. I'm not sure if he makes and sells them, but a machine shop should be able to take the cad file and make it for you.</TD></TR></TABLE>

thanks...

I hope I can find one soon.

 

if your talking about the intermedite shaft adapter all you need is a welder and some 1/2 thick steel, i did it to mine.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dartonh22 &raquo;</TD></TR><TR><TD CLASS="quote">if your talking about the intermedite shaft adapter all you need is a welder and some 1/2 thick steel, i did it to mine.</TD></TR></TABLE>

I have neither. and yes its what Im talking about

 

i have an adaptor plate. Pirate makes them. But i have an extra laying around.

 

does anyone have a picture of what one looks like? bolted to the back of the block?

 

Look in the NA faq's at preludeonline.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vinuneuro &raquo;</TD></TR><TR><TD CLASS="quote">Look in the NA faq's at preludeonline.</TD></TR></TABLE>

man, my subscription just expired on that site too....

 

It's free now, with the new owners.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vinuneuro &raquo;</TD></TR><TR><TD CLASS="quote">It's free now, with the new owners.</TD></TR></TABLE>

since when? I just tried looking there about 2 weeks ago and it wouldn't let me

but I found a pic pirate posted. It doesn't seem to be to much to it though.

 

ok, i just saw the write up. very good write up indeed. i might get some steel and tackle it myself. well see.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lude98SH &raquo;</TD></TR><TR><TD CLASS="quote">i have an adaptor plate. Pirate makes them. But i have an extra laying around. </TD></TR></TABLE>

PM'd

 

WIll I have any problems if I just unplug the computer for the ATTS???

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by oneprelude &raquo;</TD></TR><TR><TD CLASS="quote">WIll I have any problems if I just unplug the computer for the ATTS???</TD></TR></TABLE>

the point of ATTS removal is the weight or to run a base tranny...if your not gonna take it off, then just leave it plugged up and use the ATTS

 

So, if i were to remove the ATTS and unplug the computer for the ATTS, it would not throw any kind of codes (CEL) right???

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by oneprelude &raquo;</TD></TR><TR><TD CLASS="quote">So, if i were to remove the ATTS and unplug the computer for the ATTS, it would not throw any kind of codes (CEL) right???</TD></TR></TABLE>

noo...b/c the atts has its own computer I think and has nothing to do with the ECU

 

any news about the adapter plate????

 

what about it ?

 

I don't think that I have put my 2¢ into this thread yet but I aready have a couple of these adapter plates made. Most shops will charge you for material, tooling and actual time. So you can figure over $100 depending on the cad file and shop. Mine are far less than that with less waiting.

If you want one, PM me.

Pirate

 

Do you have a picture of it?? THanks

 

We-todd image hosting's down so no.

 

hey im looking to do a base tranny conversion on my sh motor. do you have any pictures send them to me at youngunz1@aim.com. how much do you ask? what else is needed to do the full conversion? and is there any other modification need to be done on block? im swapping a h22 on my ek9. everything ready to install.

 

bump

 

wheres this guy private with the plates!!