Big WI B-series sale, all must go soon. Prices negotiable!!!
Thread Starter
Member
Joined: May 2005
Posts: 1,003
Likes: 0
From: Madison, Wisconsin, U.S.A
Big WI B-series sale, all must go soon. Prices negotiable!!!
First off the only reason why I'm selling all this B series stuff is because I put a K20 in my car. That's all, but I'm very motivated to sell everything promptly.
1. I have a Fully Built head, minus cams and it has OE valves, it's a GSR head with a full port and polish done by Pure Tuning and I have plenty of people that will vouche for that company. It's got a full race port and polish and has super tech springs and crower chromoly retainers so you'll never have to replace retainers due to bending or snapping. Really good stuff!! It supposedly flows 308-310CFM Perfect for all you guys trying to make big power on the street or just on your drag car, either way, it'll be an awesome head. I payed 350 for the head alone around 600 for the springs and retainers probly more than that actually and 1200 for the head work. I'm asking $1,250 picked up or plus shipping FIRM and also it's alll brand new never even been completely out of the box.
PRICE DROP ON THE HEAD TO $1,100 and that's final. I can't take anymore of a loss!!! Also, I forgot to mention this price is with a port matched edlebrock victor x intake manifold!!!
5. I have a 70mm mustang throttle body with honda tps sensor ready to go on a honda that's been port match to a edlebrock victor X manifold for $200
6. I have a set blueprint mfg LS connecting rods. They're I beams so they're meant for all motor, but they can also be used in LOW boost applications too. Really strong, really light weight. Also, these are made in small batches which is good for quality control
Retail is $400 and I'll do $275 for these.
7. I have an extremely nice JG engine dynamics header it's a Big Tube race design and I payed over $700 for it but I can do $600 but shipping is at buyers expense.
Price drop on the header to $500...... need it gone! (here's a pic for you guys, it's the one on the left, the "full race" header.)
http://jgenginedynamics.com/2%...R.gif
I'm deffinately forgetting a few things but please few free to ask any questions about any of the products I have for sale and pics are obtainable upon buyers request because I don't have a lot of time to put pics on the site. Here's my phone number if you have any questions regarding any of this stuff. 608-225-0695 and my name is Sean. I live in Madison WI just so you know where I'm located. Cheers and I hope everyone had a great holiday!!!
Modified by Hatchorama at 7:10 PM 3/12/2008
Modified by Hatchorama at 7:11 PM 3/12/2008
Modified by Hatchorama at 11:48 AM 3/16/2008
Modified by Hatchorama at 4:57 PM 4/20/2008
Modified by Hatchorama at 9:37 AM 4/30/2008
1. I have a Fully Built head, minus cams and it has OE valves, it's a GSR head with a full port and polish done by Pure Tuning and I have plenty of people that will vouche for that company. It's got a full race port and polish and has super tech springs and crower chromoly retainers so you'll never have to replace retainers due to bending or snapping. Really good stuff!! It supposedly flows 308-310CFM Perfect for all you guys trying to make big power on the street or just on your drag car, either way, it'll be an awesome head. I payed 350 for the head alone around 600 for the springs and retainers probly more than that actually and 1200 for the head work. I'm asking $1,250 picked up or plus shipping FIRM and also it's alll brand new never even been completely out of the box.
PRICE DROP ON THE HEAD TO $1,100 and that's final. I can't take anymore of a loss!!! Also, I forgot to mention this price is with a port matched edlebrock victor x intake manifold!!!
5. I have a 70mm mustang throttle body with honda tps sensor ready to go on a honda that's been port match to a edlebrock victor X manifold for $200
6. I have a set blueprint mfg LS connecting rods. They're I beams so they're meant for all motor, but they can also be used in LOW boost applications too. Really strong, really light weight. Also, these are made in small batches which is good for quality control
Retail is $400 and I'll do $275 for these.7. I have an extremely nice JG engine dynamics header it's a Big Tube race design and I payed over $700 for it but I can do $600 but shipping is at buyers expense.
Price drop on the header to $500...... need it gone! (here's a pic for you guys, it's the one on the left, the "full race" header.)
http://jgenginedynamics.com/2%...R.gif
I'm deffinately forgetting a few things but please few free to ask any questions about any of the products I have for sale and pics are obtainable upon buyers request because I don't have a lot of time to put pics on the site. Here's my phone number if you have any questions regarding any of this stuff. 608-225-0695 and my name is Sean. I live in Madison WI just so you know where I'm located. Cheers and I hope everyone had a great holiday!!!
Modified by Hatchorama at 7:10 PM 3/12/2008
Modified by Hatchorama at 7:11 PM 3/12/2008
Modified by Hatchorama at 11:48 AM 3/16/2008
Modified by Hatchorama at 4:57 PM 4/20/2008
Modified by Hatchorama at 9:37 AM 4/30/2008
Re: Big WI B-series sale, all must go soon. Prices negotiable!!! (Hatchorama)
just wondering...can you take everything out of the head and leave all the bolts and valve cover and etc...ill buy the bare head..nothing more...dont need the retainers or dual valve springs or cams...just the head...
Thread Starter
Member
Joined: May 2005
Posts: 1,003
Likes: 0
From: Madison, Wisconsin, U.S.A
no, I can't do that. plus, this is too good of a deal for all this stuff, you're basically getting a free springs, retainers, and a free victor x manifold. buy this stuff from me and sell your stuff! it's untouched 100% brand new.
Trending Topics
Thread Starter
Member
Joined: May 2005
Posts: 1,003
Likes: 0
From: Madison, Wisconsin, U.S.A
Thread
Thread Starter
Forum
Replies
Last Post
TURBOFTW
Classifieds: Forced Induction
12
Nov 21, 2013 03:12 PM
allmotorhatch
For Sale
12
Jan 31, 2006 11:37 AM
