How to wire power locks into my 4th gen?
Thread Starter
Junior Member
Joined: Apr 2007
Posts: 115
Likes: 0
From: Richmond, Virginia, United States
How to wire power locks into my 4th gen?
So basically I have the harness and door lock regulator and trim panels and I was wondering if anyone could give me or link to me a walk-through on how to pur/wire them into my Prelude S that doesn't have power locks. A buddy of mine did it with his Civic a while back but he is too busy with his shop to show me how to do it anytime soon. I searched here and couldn't find anything.
Thanks
Modified by ZakkWylde at 8:13 PM 2/28/2008
Thanks
Modified by ZakkWylde at 8:13 PM 2/28/2008
Honda-Tech Member
Joined: Feb 2008
Posts: 121
Likes: 0
From: KILLEEN, TX, United States
Re: How to wire power locks into my 4th gen? (ZakkWylde)
Your best bet is to switch out your door latch with another model with the power locks. it takes some custom work but thats all i can do.
Check with your local Car Toys. see if they know anything.
Check with your local Car Toys. see if they know anything.
Thread Starter
Junior Member
Joined: Apr 2007
Posts: 115
Likes: 0
From: Richmond, Virginia, United States
Re: How to wire power locks into my 4th gen? (IrregularRice)
Well I have all the stuff to do it, I just don't know if there is any special wiring or anything.
Thread
Thread Starter
Forum
Replies
Last Post
classicrocker85
Honda Civic / Del Sol (1992 - 2000)
2
Aug 5, 2008 03:15 PM