need help on a built up for a built b16 head on a gsr block
Thread Starter
Joined: Nov 2006
Posts: 3
Likes: 0
From: Boston, Ma, USA
need help on a built up for a built b16 head on a gsr block
i have a bulit b16 head thats milled .20
5 axis cnc ported
spoon cams
copper beryllium valves seats
ferrea stainless steel valves
ferrea titanium retainers
toda high pressure valve springs
and a gsr block stock
im trying to do all motor i was wndering if i put the head on the stock bottom would their be a big difference in hp or not as much.. and im thinking on to buying rods and pistons but dont know which pistons would work the best with this im trying not to go over 12 CR help thanks
5 axis cnc ported
spoon cams
copper beryllium valves seats
ferrea stainless steel valves
ferrea titanium retainers
toda high pressure valve springs
and a gsr block stock
im trying to do all motor i was wndering if i put the head on the stock bottom would their be a big difference in hp or not as much.. and im thinking on to buying rods and pistons but dont know which pistons would work the best with this im trying not to go over 12 CR help thanks
Thread
Thread Starter
Forum
Replies
Last Post
delsollove
All Motor / Naturally Aspirated
2
Dec 9, 2006 02:32 PM
