Hey guys.

I drive an ep3, my buddy just got an em2.

I have/have access to a lot of stock ep3 parts, such as seats/trim/steering wheel/etc...

What are common ep parts being used in em2's these days?
I'm not that familiar with the em2 peeps....
Thanks in advance!

 

seats, steering wheel, shift ****, gauge cluster, sway bars, springs

 

in terms of USDM OEM Honda parts from an ep3 i don't think springs would be used but the rest of the parts is about right.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by i-VTEC_DOHC &raquo;</TD></TR><TR><TD CLASS="quote">seats, steering wheel, shift ****, gauge cluster, sway bars, springs</TD></TR></TABLE>
Probably the best things to get off EP3 stock wise.

 

it is not a perfect fit, you need a custom bezel and rewiring has to be done... unless your friend doesn't mind the gaps

 

cool thanks!

i have seen some seat/steering wheel swaps.
Are there any issues with the sways?

ie: exhaust clearance/etc?

 

suspension parts will work. rear disc brakes and what everybody else said

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PremierEM2 &raquo;</TD></TR><TR><TD CLASS="quote">so u need to get new wireharness or how u rewire</TD></TR></TABLE>

You need to repin the harness. The plugs fit the ep3 cluster.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eloist2 &raquo;</TD></TR><TR><TD CLASS="quote">cool thanks!

i have seen some seat/steering wheel swaps.
Are there any issues with the sways?

ie: exhaust clearance/etc?</TD></TR></TABLE>

im not completely sure about the rear, but the front will work if the EM2 is either a DX or LX. EX wont clear the cat. rear might be bolt on.

 

what about aftermarket wise? like struts full coilovers and ect. are those compatable? from an ep3 to an EM

 

EP3 aftermarket suspension fits on the em2/es1/es2

I have ep3 buddy club coilovers on my car.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PremierEM2 &raquo;</TD></TR><TR><TD CLASS="quote">do u have a diagram or is there a diagram i couldn't find any</TD></TR></TABLE>

No I don't have the diagram. I'm going to ask my friend at honda to print one off when i find the time to change my cluster to the EP3 type R.

 

not to be an idiot here but wat does ep2 and ep3 mean?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FAQ's &raquo;</TD></TR><TR><TD CLASS="quote">The Ultimate Honda Chassis Code List: Link</TD></TR></TABLE>

 

word that finally concludes my question ive been wanting to ask for a while now..didnt wanna feel like a dumbass and make a post on that but i appreciate it