does an LS intake manifold bolt on a b16 or gsr head
or does only the P72 and P30 work on both heads

 

PR4/P75/LS/CRV only fits its own head - LS = LS
P72/GSR only fits its own head - GSR = GSR
P30/PR3/P73/B16/ITR fits its own head - B16 = ITR

 

no. p72 or p75 wont bolt on to b16a. cause bolt patterns are off.
however p73 itr will bolt on to b16a p30

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pdiggitydogg &raquo;</TD></TR><TR><TD CLASS="quote">PR4/P75/LS/CRV only fits its own head - LS = LS
P72/GSR only fits its own head - GSR = GSR
P30/PR3/P73/B16/ITR fits its own head - B16 = ITR</TD></TR></TABLE>

 

so i can only use a p72 manifold on a gsr head correct

 

10:57 bump

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by streetcartuner &raquo;</TD></TR><TR><TD CLASS="quote">so i can only use a p72 manifold on a gsr head correct </TD></TR></TABLE>
yes. or u can buy an aftermarket IM for your GSR

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pdiggitydogg &raquo;</TD></TR><TR><TD CLASS="quote">PR4/P75/LS/CRV only fits its own head - LS = LS
P72/GSR only fits its own head - GSR = GSR
P30/PR3/P73/B16/ITR fits its own head - B16 = ITR</TD></TR></TABLE>

Good info here!

/thread.

 

well im doing a DIY ITB and i have the throttle bodies but i need the manifold and air horns so ya i just needed to kno thanxs guys some much