Figured some of you guys like pics of shops and what not.









Check out the fitment, the flex is pretty much touching the oil pan




We have some warm days, we have some cold days, then we have days where we get over a foot of snow



Yep, snow. Here is a customers car that actually slide into another eg a few weeks back.






I myself told him it would be good for road racing as it would help with turning

Our next car this week that we worked on was a si, as you can see in the pics. The car from outside looked like a sleeper... well after this week it didn't . Customer went with 3 inch piping ( yes we told him it was a tad to much but he has other plans in the future )



Notice the stock piping still on the car, that will be coming off next week for 3 inch exhaust done by us



Brandon, thinking about what to do next, and why I always take pictures of his backside.

Some more piping






Prelude with an f23.... yep. Came in with all wrong mounts, engine sitting on an angle, we had to figure out how to solve it and we did.



Don't mind the manifold on there ( not ours ) the turbo nails the alternator.

Overall shot of the shop




And finally a custom mini ram, side mounted wastegate and this customer actually wanted the turbo closer to the block.






Modified by RCautoworks at 9:08 PM 2/13/2008

 

damnn thats sick!!!!

 

Check out the fitment, the flex is pretty much touching the oil pan



Wow...just about everything I saw was EXTREMELY nice!!!

 

ive always wanted to open a shop like that

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HeyMikeyyyy &raquo;</TD></TR><TR><TD CLASS="quote">damnn thats sick!!!! </TD></TR></TABLE>

Thanks

 

cool shots!

I really like how clean your shop is compared to most around our area. keep us updated on projects.

 

This ***** my dream right here. To own and run a shop like this Sick, just sick

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civicSIfnatic &raquo;</TD></TR><TR><TD CLASS="quote">Check out the fitment, the flex is pretty much touching the oil pan

Wow...just about everything I saw was EXTREMELY nice!!!


</TD></TR></TABLE>

Thanks, yes its a tight fitment. Its actually bending down a little bit due to the flex pipe flexing. We test fit and take a lot of time before the final product is welded up, in the end its worth it.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by solerizr &raquo;</TD></TR><TR><TD CLASS="quote">This ***** my dream right here. To own and run a shop like this Sick, just sick </TD></TR></TABLE>

Living the American dream, its nice.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by electron_si &raquo;</TD></TR><TR><TD CLASS="quote">cool shots!

I really like how clean your shop is compared to most around our area. keep us updated on projects.</TD></TR></TABLE>

Believe it or not, it was pretty dirty. I'm very ocd and **** about the shop upkeep but since its me and one other guy working here, its hard taking time out to clean. We just work and work... which is always good in its own way.

 

Dialed

 

 

Sawwwwweeeeeeeeetttttttttttttttttt, get a lift

 

Good stuff

 

not a bad place to work

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MidwestAutoWorks &raquo;</TD></TR><TR><TD CLASS="quote">Sawwwwweeeeeeeeetttttttttttttttttt, get a lift</TD></TR></TABLE>

Companies around here want to much to install and sell, we are looking for used. We found a rotary that was 1,500 about, it was just to late to bid on it.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by macDelli &raquo;</TD></TR><TR><TD CLASS="quote">not a bad place to work </TD></TR></TABLE>

Not at all

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B16B_coupe &raquo;</TD></TR><TR><TD CLASS="quote">Dialed </TD></TR></TABLE>

Thanks, not 100% sure what it means but its a compliment

 

You guys are going to make it to top real fast with that work.

 

Very nice work man you keep getting better and better

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by siblues &raquo;</TD></TR><TR><TD CLASS="quote">Very nice work man you keep getting better and better </TD></TR></TABLE>

Thank you, we are always looking at ways to improve our design and ourselves. If everything was always the same, things would get boring and routine.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HondamanXxX &raquo;</TD></TR><TR><TD CLASS="quote">You guys are going to make it to top real fast with that work. </TD></TR></TABLE>

 

night and day

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VRD^sam &raquo;</TD></TR><TR><TD CLASS="quote">night and day </TD></TR></TABLE>

 

Very sick stuff man

 

Some more pictures, finished this one a few weeks back.





And here is a another customers setup



We have jigs here for our downpipes so they will pretty much bolt up to catbacks

 

ballin

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Lewy. Dee Ayy &raquo;</TD></TR><TR><TD CLASS="quote">ballin </TD></TR></TABLE>

You're 3 inch v-band should be worked on tomorrow I believe.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RCautoworks &raquo;</TD></TR><TR><TD CLASS="quote">

You're 3 inch v-band should be worked on tomorrow I believe. </TD></TR></TABLE>

ballin!! lol


damn. like i told brandon iv been saying the word "ballin" to much so..if i say it in person to you.. you are allowed to slap me.

 

all i have to say is

BTW i'm willing to work for you and help keep the shop clean :-P