auto body question
Thread Starter
Junior Member
Joined: Sep 2007
Posts: 219
Likes: 0
From: san diego, ca, us
auto body question
okay.. so a couple of months ago my dc2 integra got hit because a truck backed into it. it left a 9inch by 8 inch dent in my driverside rear quarter panel, that was a couple inches deep. the next day i banged it out, but there are still a couple of uneven spots in it as well as paint chipping. I am trying to prep mar car for paint and this area could be a bit of a problem. I don't know to much about bondo or autobody in general. Any ideas or suggestions?? let me know 
Honda-Tech Member
Joined: Aug 2002
Posts: 17,222
Likes: 3
From: SoCal
Re: auto body question (chrismugenracer)
knock down all the high points, sand to the metal with coarse grit paper.
use body filler to fill all area, block, do a skim coat and guide coat and block it.
easy fix just need alot of sanding
use body filler to fill all area, block, do a skim coat and guide coat and block it.
easy fix just need alot of sanding
Honda-Tech Member
Joined: Aug 2002
Posts: 17,222
Likes: 3
From: SoCal
Re: auto body question (chrismugenracer)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by chrismugenracer »</TD></TR><TR><TD CLASS="quote">what do you mean by block</TD></TR></TABLE>
block as sanding a large surface down with a contour tool(a block, as body block, not lego or milk case)
block as sanding a large surface down with a contour tool(a block, as body block, not lego or milk case)
Thread
Thread Starter
Forum
Replies
Last Post
