Shoulds I gap my NGK BKR7E-11 spark plugs for my ITR engine? I thought these were pre-gapped? Whats the gap size I should use?

 

they are pre-gapped

the "11" in the part # stands for 1.1mm gap

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlueR &raquo;</TD></TR><TR><TD CLASS="quote">they are pre-gapped

the "11" in the part # stands for 1.1mm gap

</TD></TR></TABLE>

And to add to that... ALWAYS DOUBLE CHECK THEM!!!!!!!!!!!!!!!!!!!!!!!!

 

I run the "6", they're pre-gapped, but sometimes they do need a small amount of adjusting, I always double check the gappings prior to installing them.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dave_B &raquo;</TD></TR><TR><TD CLASS="quote">

And to add to that... ALWAYS DOUBLE CHECK THEM!!!!!!!!!!!!!!!!!!!!!!!!</TD></TR></TABLE>

Thanks guys.

 

i gap my bkr7e-11's at .018 to .020in

 

most people use 7's for boost??

 

I used 7's on my turbo DC, but since I'm running a JDM ITR engine, Ive heard that 7's are the stock plugs.