TW: SoHonda Garage.//EKSQUAD Mike's 98 Dap EK
Thread Starter
Honda-Tech Member
Joined: Oct 2004
Posts: 5,749
Likes: 0
From: Rhode Island
TW: SoHonda Garage.//EKSQUAD Mike's 98 Dap EK
I want to start that I by no means NEED to sell this car, and wasn't really planning on selling it until Fall, but I figure I'll post it up to see what I can sell it for.
I am the second owner of this car, the first was my aunt. This car has been almost fully taken apart and built back together. (See link in my sig for build pics). All work has been done by myself (Former Honda Technician, Degree in Automotive Technology), and the help of others in SHG one who is also a Honda tech.
The motor is 100% legit as it came from my buddy's totaled EM1. I have all paperwork including Bill of sale and copy of the title from the original car. It has 105XXX Miles on it. The Chasis has about 155XXX miles.
Things replaced in the passed year
Upper ball joints (BRAND NEW)
lower ball joints
Dr. Tie rod end
Rear shoes
Hawk HPS front pads
Timing belt replaced 30k ago on the motor
The only thing that could be considered as "bad" is the exterior. Its been daily driver its whole life and has the signs of this. Front bumper has a crack in it. Various small dings chips throughout the car as expected. If you are picky you will probably want a wetsand and have some dings pulled or just a simple respray.
Suspension/Brakes:
Buddyclub N+ dampers
Skunk2 Upper adj arms
99 si front lower arms
99 si front sway bar
Blox rear lower arms
Blow adj rear endlinks
22mm ITR rear swaybar
Beaks Subframe reinforcement kit
Hawk HPS front pads
Stock Rear drums
Goodridge SS lines
Wheels/Tires
14"steelie/Winterforce tires
(ATS wheels/azenis, for an extra 500)
Engine:
'99 spec B16a2 motor and tranny
Toda Flywheel
Exedy Stage 1 clutch
SHG airbox with 3" intake arm
4-1 generic SS Header
RS*R Exhaust
Interior:
99si/CTR Hybrid Cluster
NRG short hub/Quick Release
Momo Mod 08 wheel(stock wheel with airbag available)
Razo aluminum Pedals
SHG Checker shift boot
Checker Floor mats
F1Spec type III bucket seats (Driver/Pass)
Autopower Race rollbar
Rear gutted(Still have rear seats dyed black)
Exterior
DIY CTR style headlights
DIY CTR style grill
Mugen replica lip
CTR wing, unpainted uninstalled
Looking for BEST OFFER right now. Dont waste my time with anything too low. Ive put at least 7-8k into this plus COUNTLESS hours into it plus the initial car cost.
SEE SIG FOR MORE PICS
<FONT SIZE="5">$8000obo</FONT>
Modified by SHG_Mike at 8:15 PM 1/29/2008
I am the second owner of this car, the first was my aunt. This car has been almost fully taken apart and built back together. (See link in my sig for build pics). All work has been done by myself (Former Honda Technician, Degree in Automotive Technology), and the help of others in SHG one who is also a Honda tech.
The motor is 100% legit as it came from my buddy's totaled EM1. I have all paperwork including Bill of sale and copy of the title from the original car. It has 105XXX Miles on it. The Chasis has about 155XXX miles.
Things replaced in the passed year
Upper ball joints (BRAND NEW)
lower ball joints
Dr. Tie rod end
Rear shoes
Hawk HPS front pads
Timing belt replaced 30k ago on the motor
The only thing that could be considered as "bad" is the exterior. Its been daily driver its whole life and has the signs of this. Front bumper has a crack in it. Various small dings chips throughout the car as expected. If you are picky you will probably want a wetsand and have some dings pulled or just a simple respray.
Suspension/Brakes:
Buddyclub N+ dampers
Skunk2 Upper adj arms
99 si front lower arms
99 si front sway bar
Blox rear lower arms
Blow adj rear endlinks
22mm ITR rear swaybar
Beaks Subframe reinforcement kit
Hawk HPS front pads
Stock Rear drums
Goodridge SS lines
Wheels/Tires
14"steelie/Winterforce tires
(ATS wheels/azenis, for an extra 500)
Engine:
'99 spec B16a2 motor and tranny
Toda Flywheel
Exedy Stage 1 clutch
SHG airbox with 3" intake arm
4-1 generic SS Header
RS*R Exhaust
Interior:
99si/CTR Hybrid Cluster
NRG short hub/Quick Release
Momo Mod 08 wheel(stock wheel with airbag available)
Razo aluminum Pedals
SHG Checker shift boot
Checker Floor mats
F1Spec type III bucket seats (Driver/Pass)
Autopower Race rollbar
Rear gutted(Still have rear seats dyed black)
Exterior
DIY CTR style headlights
DIY CTR style grill
Mugen replica lip
CTR wing, unpainted uninstalled
Looking for BEST OFFER right now. Dont waste my time with anything too low. Ive put at least 7-8k into this plus COUNTLESS hours into it plus the initial car cost.
SEE SIG FOR MORE PICS
<FONT SIZE="5">$8000obo</FONT>
Modified by SHG_Mike at 8:15 PM 1/29/2008
Thread
Thread Starter
Forum
Replies
Last Post