Those fancy bolts you are all buying, but BALLER!
Thread Starter
Honda-Tech Member
Joined: May 2004
Posts: 909
Likes: 0
From: Minneapolis, MN
Those fancy bolts you are all buying, but BALLER!
I'm offering the same ones that garage works guy was selling for 50.00 for 20 spray painted washers! 
But i'm going to make my deal much more sweeter. (Check out http://www.wootparts.com for more info!)
Most of you guys found the washers and the bolts on the fastenal's site, and realized you can order them up for cheaper than he was selling him. I was in the same boat, I ended up ordering from him, and when they came in they were all chipped up and were pretty much garbage. (I ended up wire-wheeling mine down and making them silver again.)
So, I decided to hit up another bolt store (not fastenal) and get the bolts/washers. I got them in the correct sizes, not ones that are only going to screw in about 1/4 of the way in a fully threaded hole, and i got all stainless not steel bolts! He was offering the stainless ones as well but for 15.00 more I think it was.
So, lets cut to the chase.
i'm offering these washers and bolts in a 20 piece kit. These are enough to do an ef/eg/da/ek/em1/em2ep3 engine bay, and with 5 left over in case you find somewhere else you want to put them!
The washers will NOT be spray painted. I am offering the washers POWDERCOATED, so they will not scratch or crack up like the spraypainted ones will. I am also offering the bolts POWDERCOATED as well for an extra 5 dollars.
Also, to make this deal much sweeter for you guys. I know alot of you guys that are ordering these have freshly painted bays, shaved bays, and are very **** about their paint/look. The kits will come with the same amount of RUBBER washers that lay down first to keep from scratching or cracking of the paint when installing the bolts/washer combo.
So, Recap:
-20 Bolts (Enough to do a complete honda engine bay with 5 to spare)
-POWDERCOATED, No cheap Sh33t here!
-Rubber washers that lay under the metal washer so you don't scratch your sh33t!
-I'm not going to rip you off.
Here is a picture of the combo I am offering. These are the CORRECT sizes and LENGTH!
Wrinkle Red:
Now, I'll be getting pictures up tomorrow or wednesday of some done in color!
Standard Colors are: Candy Red, Candy Blue, Candy Purple, Candy Orange, And Mirror Black!
Custom Colors are available for an extra $10.00
Colors available for custom are below:
Colors candys !
red,
blue,
orange
purple
gold
green
Reg colors!
yellow
satin black
flat black
glossy black
mirror black
red
red wrinkle
Silver
Met silver
mirror silver
chrome
Neon pink
neon yellow
dark green
white
PRICES!:
Kit 1 - 20 washers powdercoated with BLACK STEEL BOLTS : $40.00 Shipped
Kit 2 - 20 washers powdercoated w/ SILVER STAINLESS BOLTS : $50.00 Shipped
Kit 3 - 20 washers powdercoated w/ SILVER STAINLESS BOLTS + Rubber Washers : 55.00 Shipped
Kit 4 - 20 washers plain w/ black bolts : $20.00 shipped
kit 5 - 20 GOLD washers w/ black bolts: $32.00 shipped
Kit 6 - 20 GOLD washers w/ Stainless Bolts : 40.00 shipped
If you must know, after all said and done. I am making $5.00 a kit, just to make up for my time in running to the powdercoaters and post office.
I accept, debit/credit, paypal, and money orders. All credit card orders will be done through Secure Google Checkout. This making it secure because your credit card number will never be revealed to me.
All washers will be shipped in a padded box and each washer will be on a ziptie with construction paper in between so there will be no scratches in shipping!
Each of these kits will fit:
-ALL HONDA's and ACURA's
-02+ WRX/STi
-EVO
-1g and 2g DSM's
-Xb/TC/XA
These do Hood, Fenders, Headlights, and radiator support bolts!
If a vouch list is needed, please inquire!
AIM: ek20a2
Email : ek20a2@aim.com
Phone : Avail in pm's!
Modified by onefastegg at 11:23 PM 1/30/2008
Modified by onefastegg at 12:34 AM 2/2/2008
Modified by onefastegg at 2:26 AM 2/4/2008
But i'm going to make my deal much more sweeter. (Check out http://www.wootparts.com for more info!)
Most of you guys found the washers and the bolts on the fastenal's site, and realized you can order them up for cheaper than he was selling him. I was in the same boat, I ended up ordering from him, and when they came in they were all chipped up and were pretty much garbage. (I ended up wire-wheeling mine down and making them silver again.)
So, I decided to hit up another bolt store (not fastenal) and get the bolts/washers. I got them in the correct sizes, not ones that are only going to screw in about 1/4 of the way in a fully threaded hole, and i got all stainless not steel bolts! He was offering the stainless ones as well but for 15.00 more I think it was.
So, lets cut to the chase.
i'm offering these washers and bolts in a 20 piece kit. These are enough to do an ef/eg/da/ek/em1/em2ep3 engine bay, and with 5 left over in case you find somewhere else you want to put them!
The washers will NOT be spray painted. I am offering the washers POWDERCOATED, so they will not scratch or crack up like the spraypainted ones will. I am also offering the bolts POWDERCOATED as well for an extra 5 dollars.
Also, to make this deal much sweeter for you guys. I know alot of you guys that are ordering these have freshly painted bays, shaved bays, and are very **** about their paint/look. The kits will come with the same amount of RUBBER washers that lay down first to keep from scratching or cracking of the paint when installing the bolts/washer combo.
So, Recap:
-20 Bolts (Enough to do a complete honda engine bay with 5 to spare)
-POWDERCOATED, No cheap Sh33t here!
-Rubber washers that lay under the metal washer so you don't scratch your sh33t!
-I'm not going to rip you off.
Here is a picture of the combo I am offering. These are the CORRECT sizes and LENGTH!
Wrinkle Red:
Now, I'll be getting pictures up tomorrow or wednesday of some done in color!
Standard Colors are: Candy Red, Candy Blue, Candy Purple, Candy Orange, And Mirror Black!
Custom Colors are available for an extra $10.00
Colors available for custom are below:
Colors candys !
red,
blue,
orange
purple
gold
green
Reg colors!
yellow
satin black
flat black
glossy black
mirror black
red
red wrinkle
Silver
Met silver
mirror silver
chrome
Neon pink
neon yellow
dark green
white
PRICES!:
Kit 1 - 20 washers powdercoated with BLACK STEEL BOLTS : $40.00 Shipped
Kit 2 - 20 washers powdercoated w/ SILVER STAINLESS BOLTS : $50.00 Shipped
Kit 3 - 20 washers powdercoated w/ SILVER STAINLESS BOLTS + Rubber Washers : 55.00 Shipped
Kit 4 - 20 washers plain w/ black bolts : $20.00 shipped
kit 5 - 20 GOLD washers w/ black bolts: $32.00 shipped
Kit 6 - 20 GOLD washers w/ Stainless Bolts : 40.00 shipped
If you must know, after all said and done. I am making $5.00 a kit, just to make up for my time in running to the powdercoaters and post office.
I accept, debit/credit, paypal, and money orders. All credit card orders will be done through Secure Google Checkout. This making it secure because your credit card number will never be revealed to me.
All washers will be shipped in a padded box and each washer will be on a ziptie with construction paper in between so there will be no scratches in shipping!
Each of these kits will fit:
-ALL HONDA's and ACURA's
-02+ WRX/STi
-EVO
-1g and 2g DSM's
-Xb/TC/XA
These do Hood, Fenders, Headlights, and radiator support bolts!
If a vouch list is needed, please inquire!
AIM: ek20a2
Email : ek20a2@aim.com
Phone : Avail in pm's!
Modified by onefastegg at 11:23 PM 1/30/2008
Modified by onefastegg at 12:34 AM 2/2/2008
Modified by onefastegg at 2:26 AM 2/4/2008
Trending Topics
Honda-Tech Member
iTrader: (4)
Joined: Dec 2004
Posts: 4,344
Likes: 1
From: Bellevue/NE, Dallas/TX, USA
Re: Those fancy bolts you are all buying, but BALLER! (talespinc)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by talespinc »</TD></TR><TR><TD CLASS="quote">I'll probably gonna order some in the spring time when i get my car repainted! but good deal!</TD></TR></TABLE>
