Me and my brother just put in a new clutch into my integra. We get the car back together and only reverse engages. Is the clutch installed properly? We think its the shift linkage because its not going into 1-5th, only reverse.

 

Wrong forum, lol

 

wrong forum d-bag

 

Glad you guys could think of something THAT original...

There are actual tech saavy people in GDD, that's why i posted it in here. If you dont know the answer, keep posting, it will just keep this thread at the top.

 

i nominate this thread for failur eof the hour..lol sounds like the clutch is NOT the issue here...........

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by YeuEmMaiMai &raquo;</TD></TR><TR><TD CLASS="quote">i nominate this thread for failur eof the hour..lol sounds like the clutch is NOT the issue here...........</TD></TR></TABLE>


Thanks for throwing your .02 out there. I'm glad you felt the need to share SOMETHING, regardless of how unhelpful it is.

 

*grabs popcorn

BUMP

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DC4Dan &raquo;</TD></TR><TR><TD CLASS="quote">

There are actual tech saavy people in GDD, that's why i posted it in here. </TD></TR></TABLE>

Bullshit, we dont even have cars in here s0n

 

Im not familiar with the DC or cable shifter transmissions but sounds like its the shift linkage.


Best to ask in the Integra forum where people actually know the specific car and have worked on them.

 

think about this for longer than the 1/2 second that you did.........if reverse engages but the forward gears do not, it ain't the clutch.........

 

y didnt u put this in the integra forum? there ull get some tech responses instead of <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Lude-Conduct &raquo;</TD></TR><TR><TD CLASS="quote">Wrong forum, lol</TD></TR></TABLE>
and
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Senses Fail y0! &raquo;</TD></TR><TR><TD CLASS="quote">wrong forum d-bag</TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H22Ej1 &raquo;</TD></TR><TR><TD CLASS="quote">y didnt u put this in the integra forum? there ull get some tech responses instead of
and</TD></TR></TABLE>

I did.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by YeuEmMaiMai &raquo;</TD></TR><TR><TD CLASS="quote">think about this for longer than the 1/2 second that you did.........if reverse engages but the forward gears do not, it ain't the clutch.........</TD></TR></TABLE>

So is it the shift linkage? What would cause this? This is my first time doing this, so if you could enlighten me, go ahead.

 

you put it on wrong if it only engages reverse but not 1-5

That was caused be being inexperienced

 

was the clutch properly aligned when installed? could be a number of things...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ucb &raquo;</TD></TR><TR><TD CLASS="quote">you put it on wrong if it only engages reverse but not 1-5

That was caused be being inexperienced </TD></TR></TABLE>

Thanks kyle. We used the alignment tool so i dont understand why this **** doesnt work. Do you know what we did wrong? How would we know what to do differently if we took it apart again?

GOD DAMNIT! I really dont feel like pulling my teg apart again. Im about to say expletive it and have it towed to acura.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by f@sth@tch89 &raquo;</TD></TR><TR><TD CLASS="quote">was the clutch properly aligned when installed? could be a number of things...</TD></TR></TABLE>

My brother did the aligning with the tool so he thought he did it right. How big of a possibility is it that its not the clutch at this point?

 

did you put in all new parts? or just a new clutch, I would have replaced the springs and thorw-out bearing as well.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by YeuEmMaiMai &raquo;</TD></TR><TR><TD CLASS="quote">did you put in all new parts? or just a new clutch, I would have replaced the springs and thorw-out bearing as well.</TD></TR></TABLE>

New clutch, pressure plate, throw out bearing.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DC4Dan &raquo;</TD></TR><TR><TD CLASS="quote">Me and my brother just put in a new clutch into my integra. We get the car back together and only reverse engages. Is the clutch installed properly? We think its the shift linkage because its not going into 1-5th, only reverse. </TD></TR></TABLE>

If it is cable operated, make sure that the tension on said cable is loosened.

 

sounds like an ID 10 T error.

 

did you take the whole shift linkage out? Did you put it back properly?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DC4Dan &raquo;</TD></TR><TR><TD CLASS="quote">

My brother did the aligning with the tool so he thought he did it right. How big of a possibility is it that its not the clutch at this point?</TD></TR></TABLE>

The alignment tool just situates the clutch so it can be bolted. Is the pin in the shift linkage installed correctly?

 

You probably expletiveed up when reattaching the shifter rods, cause that doesn't sound like a clutch at all.

 

I'm a mechanic and I'll help out a swed brother. What happens when you try to shift it into the other gears? Does it feel normal or no? Can you run it thru the gears with the car off and without pressing the clutch?