Best head gasket to run
Thread Starter
Honda-Tech Member
Joined: Apr 2007
Posts: 172
Likes: 0
From: syracuse, ny, US
Best head gasket to run
whats the best head gasket to run on a sleeved B16A 8.5.1 comp... ?? looking to run about 17-19 Ibs on a T3/t67 P trim Duall BB turbo???? the block is darton sleeved looking for about 400 to 550 hp sumwhere in there Thanks!! 
Honda-Tech Member
Joined: Nov 2001
Posts: 10,759
Likes: 0
From: Alabama, us
Re: Best head gasket to run (TurboB16A300Hpteg)
With that little bit of boost it realy does not matter. Just make sure you have good head studs and that they are properly installed. In most cases where head gaskets fail it is not the gaskets fault. The cometic is a great gasket and we were able to run 70 psi of boost on it with no issues.
Trending Topics
Honda-Tech Member
Joined: Dec 2000
Posts: 20,006
Likes: 3
From: Tampa, FL
Re: Best head gasket to run (Innes)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Innes »</TD></TR><TR><TD CLASS="quote">we make 700+ wheel horsepower and use:
OEM or Golden Eagle (which are OEM bored to match your cylinders)
</TD></TR></TABLE>
What he said
OEM or Golden Eagle (which are OEM bored to match your cylinders)
</TD></TR></TABLE>
What he said
Thread Starter
Honda-Tech Member
Joined: Apr 2007
Posts: 172
Likes: 0
From: syracuse, ny, US
Re: Best head gasket to run (Blown90hatcH)
Camp1320 sucks ***** dont even try to help me out thanks for that order i placed that got lost....... cost me a extra 275 scum bags my boy said u guys did the same thing to him 
for camp 1320
for camp 1320
Re: Best head gasket to run (TurboB16A300Hpteg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboB16A300Hpteg »</TD></TR><TR><TD CLASS="quote">Camp1320 sucks ***** dont even try to help me out thanks for that order i placed that got lost....... cost me a extra 275 scum bags my boy said u guys did the same thing to him for camp 1320</TD></TR></TABLE>
always provided great service and untouchable prices for me!!!
for camp 1320</TD></TR></TABLE>always provided great service and untouchable prices for me!!!
Honda-Tech Member
Joined: Mar 2007
Posts: 3,074
Likes: 0
From: SOCAL, ca, 91702
Re: Best head gasket to run (CerealKiller)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CerealKiller »</TD></TR><TR><TD CLASS="quote">OEM by GE bored gasket </TD></TR></TABLE>
same thing we use!! GE bored gasket. works great...
</TD></TR></TABLE>same thing we use!! GE bored gasket. works great...
Honda-Tech Member
Joined: Dec 2000
Posts: 20,006
Likes: 3
From: Tampa, FL
Re: Best head gasket to run (TurboB16A300Hpteg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboB16A300Hpteg »</TD></TR><TR><TD CLASS="quote">Camp1320 sucks ***** dont even try to help me out thanks for that order i placed that got lost....... cost me a extra 275 scum bags my boy said u guys did the same thing to him for camp 1320</TD></TR></TABLE>
I didn't say anything about camp. Geesh.
OEM headgasket man.
for camp 1320</TD></TR></TABLE>I didn't say anything about camp. Geesh.
OEM headgasket man.
Honda-Tech Member
Joined: Aug 2005
Posts: 2,695
Likes: 3
From: I miss the east coast, TX, USA
Damn at the camp1320 hate.
And I have used GE overbored OEM gaskets for all of mine, and never had an issue with them unless it was a failure somewhere else that took the HG with it.
And I have used GE overbored OEM gaskets for all of mine, and never had an issue with them unless it was a failure somewhere else that took the HG with it.
Honda-Tech Member
Joined: Mar 2004
Posts: 7,913
Likes: 0
From: North Georgia/Atlanta
Re: Best head gasket to run (Blown90hatcH)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Innes »</TD></TR><TR><TD CLASS="quote">we make 700+ wheel horsepower and use:
OEM or Golden Eagle (which are OEM bored to match your cylinders)
</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Blown90hatcH »</TD></TR><TR><TD CLASS="quote">
What he said </TD></TR></TABLE>
BLING BLING!!!
OEM or Golden Eagle (which are OEM bored to match your cylinders)
</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Blown90hatcH »</TD></TR><TR><TD CLASS="quote">
What he said
</TD></TR></TABLE>BLING BLING!!!
Thread
Thread Starter
Forum
Replies
Last Post
strigga
Forced Induction
4
Sep 28, 2018 05:58 PM
saviour250
Forced Induction
15
Jun 27, 2009 06:19 AM
