Honda Civic / Del Sol (1992 - 2000) EG/EH/EJ/EK/EM1 Discussion

OBD1 automatic GSR wiring problems

Thread Tools
 
Search this Thread
 
Old Jan 15, 2008 | 11:19 AM
  #1  
Slothy's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Aug 2004
Posts: 235
Likes: 1
From: New Glasgow, NS Canada
Default OBD1 automatic GSR wiring problems

I have been asked to look at a JDM swap someone purchased to put in their 93 delsol. It is a obd1 GSR swap, automatic. The Auto p72 ecu is not like your regular 3 plug ecu, this one has 4. The 4th being the internal TCM (tranny control modual). After searching for wiring on this, I have learned that this style ecu only came on obd1 JDM automatic gsr's, civics and preludes, therefore, there is not much info out there on them. I was wondering if anyone has come across this, and know/ have a wiring diagram for it. It is a 12 pin plug, with 4 wires out to the strut tower plug, and 8 wires that go into the dash somewhere (these 8 were cut). The JDM harness is partially hacked, but I can trace 4 of the 12 wires to two sensors on the side of the tranny case, the shift solinoids are where they normally are ontop of the tranny and wiring is the same for them.

All other pinouts seem to be in their normal places, its just the TCM that is causing greif.

Any help would be appreshiated.
Reply
Old Jan 15, 2008 | 06:02 PM
  #2  
Slothy's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Aug 2004
Posts: 235
Likes: 1
From: New Glasgow, NS Canada
Default Re: OBD1 automatic GSR wiring problems (Slothy)

Up for night crew
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
89db
Hybrid / Engine Swaps
1
Jun 16, 2005 08:40 AM
chadwyk
Hybrid / Engine Swaps
1
May 5, 2005 09:21 PM
hahagasdcrx
Tech / Misc
1
Jan 16, 2005 10:38 PM
AMG
Hybrid / Engine Swaps
2
Apr 29, 2003 07:29 AM




All times are GMT -8. The time now is 05:43 AM.