FS: ITR Pistons GSR Rods ITR Crank PA
*ITR Crank sold to TXcivic96 
recently cleaned and balanced at machine shop
*USDM ITR Pistons (.25mm oversize) and GSR Connecting Rods Rods and Pistons are sold to emirbijedic
[i]missing one connecting rod nut, cost $2 from dealer - part #13205-ME2-000




Modified by vacantskies88 at 7:57 AM 1/25/2008

recently cleaned and balanced at machine shop
*USDM ITR Pistons (.25mm oversize) and GSR Connecting Rods Rods and Pistons are sold to emirbijedic
[i]missing one connecting rod nut, cost $2 from dealer - part #13205-ME2-000




Modified by vacantskies88 at 7:57 AM 1/25/2008
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by egturbolsvtec »</TD></TR><TR><TD CLASS="quote">trying to get just the pistons will u do that</TD></TR></TABLE>
Make an offer, I may take it, but it'll have to be worth my while. It's going to be hard to sell just the rods by themself.
Make an offer, I may take it, but it'll have to be worth my while. It's going to be hard to sell just the rods by themself.
Would you do $300 shipped for both? Was this all in one engine as a complete rotating assembly at one time? If so how did it work?
I will do $300 picked up, but not shipped.
Everything was from one engine yes and from what I was told it ran great. I believe the last owner was going with a low comp B20 setup for boost. I purchased it all with the intent to pick up a LS or GSR block and swap out the 1.6 for 1.8L but need the money for some bills.
Everything was from one engine yes and from what I was told it ran great. I believe the last owner was going with a low comp B20 setup for boost. I purchased it all with the intent to pick up a LS or GSR block and swap out the 1.6 for 1.8L but need the money for some bills.


