Well to get things started, i was really bored with some time of my hands. I did the drivers side wire harness and ran it through the fenderwell. Planning on doing the passenger side around next week. Everything was pretty much straight-forward. I DID NOT extend any wires.
Well lets get on to the pictures.
Heres what i had to start out with:

Sorry i didnt have any before pictures taken, after i had everything off i relialized that i should take some pictuers.

I have also already removed the windshield wiper tank so it kinda free'd up alot of space on the fender/bumper to work with.

Heres a pic of the first wires pulled through.

Nice pic of my tein dampner and the driver harness being pulled.

Stuff just being in the yard.

Some more of the harness being ran in the fender.


Finally coming together!@!


Some of my mess inside the firewall lol, But i wrapped it and tucked it under the dash.

Wire tuck is complete!

I had also tucked the wires for my windshield wipers and brake fluid sensor, and ran it just like the harness.


The finished product. Sorry for the quailty, there was a lot of mist floating in the air. It was really foggy.





Well i hope you guys enjoyed looking at the pictures.
Leave comments, flamers welcomed

 

hope you taped that harness up and added some loom where it goes in the car so them wires dont get damaged, btw. all you did was tuck the driver side... your goin to prob get some big time haters here

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B16B_coupe &raquo;</TD></TR><TR><TD CLASS="quote">hope you taped that harness up and added some loom where it goes in the car so them wires dont get damaged, btw. all you did was tuck the driver side... your goin to prob get some big time haters here </TD></TR></TABLE>
Yes, i did. I added wire loom and taped it all up last night.

 

doesn't look bad. ditch the yellow wires though and it would be better.

 

why didn't you tuck both sides?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mr.coupe &raquo;</TD></TR><TR><TD CLASS="quote">why didn't you tuck both sides?</TD></TR></TABLE>

+1 lol

 

if you plan to keep a single cam, or go k or b. i would recomind a chasebays harness... pm EF8KID for details

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mr.coupe &raquo;</TD></TR><TR><TD CLASS="quote">why didn't you tuck both sides?</TD></TR></TABLE>
Eh, didnt have time. Had school the next day.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B16B_coupe &raquo;</TD></TR><TR><TD CLASS="quote">if you plan to keep a single cam, or go k or b. i would recomind a chasebays harness... pm EF8KID for details </TD></TR></TABLE>

true story

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by yoffer &raquo;</TD></TR><TR><TD CLASS="quote">
Eh, didnt have time. Had school the next day. </TD></TR></TABLE>

should have posted when you finished both what are your plans? I heart vsm coupes

 

Looks good, get the other side done.

 

what am i looking at ????looks the same...

 

It's a great start, keep at it!

 

looks good but you still have to do the drivers side... but ya it all takes time