I just ordered an integra shortshifter for my 94 gsr and it seems like it doesn't fit.
From looking at the picture of the short shifter can you guys tell if it fits or not?

thanks
http://cgi.ebay.com/ebaymotors...ZWDVW

 

single bend? u need dual bend for ur DC. and ur going to need to use the bearing they are going to give you with the kit.

 

wow is the shift boot oem? that's cheap you're just paying for the shift boot pretty much. well it'll fit but you're going to hate it ebay shifters are crap, my co worker had his snap while shifting. and oh yeah you're not going to like the single bend either.

 

It's generally a very bad idea to get no-name ebay parts. Fitment and quality are almost always suspect.

 

DO NOT GET THAT. It is single bend and its going to a be a BISH to use cause you gona have to either reach hella far or have a gay feel when you point it the other way. trust me and do not get that :D. Well maybe for the shift boot but try to find a double bend yo

 

Dont forget to buy urself some thread tightener liquid so ur bolts dont loosen due to vibrations and what not.

 

The single bend will fit the b-series linkage. You'll just have different **** placement than the dual bend. The shifter should fit.

Do you know what is hindering it from fitting?

 

I have a single bend b&m in mine and i have no prob out of it at all.

 

My brother recently inquired that same shifter for his civic w/ ls. i had to use washers in between the shifter and linkage, so it wouldn't be so sloppy.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VRD^sam &raquo;</TD></TR><TR><TD CLASS="quote">My brother recently inquired that same shifter for his civic w/ ls. i had to use washers in between the shifter and linkage, so it wouldn't be so sloppy.</TD></TR></TABLE>


It's because these shifters are universal between d and b-series linkages. The d-series shifter is skinnier at the mounting point than the b-series shifter.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by memphisfuk &raquo;</TD></TR><TR><TD CLASS="quote">I have a single bend b&m in mine and i have no prob out of it at all. </TD></TR></TABLE>

the single bend is annoying. It isn't striaght and doesn't angle the way i want it too no matter which way i turn it. If i turn it facing the radio i have to reach HELLA far to shift and if i face towards myself the shift **** angle is all gay.

 

i have a short shifter in my 92 DA. in 3rd and 4th gear it hits the exhaust. It is so annoying. U may run into this problem, if i had a choice now i would put the stock one back in.

 

yeah, you might as well get a different shifter, i have a skunk2 single bend in my da and i love it. the threads on those aluminum ebay shifters snap. the **** is nice though, and so is the boot. not a totally bad buy!