first post on the site. i have a 95 civic w/ a obd1 integra swap (LS) sucked up some water and purchased a new motor... a 00 civic si b1642. car is already wired for vtec thanks to it being a 95 and made after aug. the car was already wired for vtec. okay got the motor in the car and i have a problem

1. can i use an integra ls obd1 distibutor on the new motor (b16a2)

2. how do i rewire the distibutor (obd1 harness, obd2 distibutor)

any got any suggestions.. except buying a new distibutor

 

as far as i know the ls dizzy wont fit the vtec head. if you get an obd1 gsr or b16a3 dizzy, you are golden.

 

okay got choo, but what about the rewiring theory. where could i find that info on HT i searched far and wide. the guy who is somepose to finshed my swap is going to rewire the distibutor but he is mia and the anticipation is killing me

 

msd makes a harness adapter, i think rywire does, you can you just need a helms with the obd1 and 2 pinouts and match sensor for sensor.

http://www.msdignition.com/2006/06-25.htm

 

thanks man