This is probably a dumb question but

I just finished swapping a h22 into my 99 ek

I have my old p72 obd1 that i planned on using but i bougt a jumper harness from a guy on here which was supposed to be obd2b-obd1 except it was obd2a-obd1.

So here i am with my swap complete and i am dying to start it.

So my question is can i just start it with the old P2E and drive it until i get the right jumper harness?

 

no one can help?

 

https://honda-tech.com/zerothread?id=650329
https://honda-tech.com/zerothread?id=650329
https://honda-tech.com/zerothread?id=362984

You're welcome.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by black_EM1 &raquo;</TD></TR><TR><TD CLASS="quote">https://honda-tech.com/zerothread?id=650329
https://honda-tech.com/zerothread?id=650329
https://honda-tech.com/zerothread?id=362984

You're welcome.</TD></TR></TABLE>

Ok that doesnt help but nice try buddy

 

I tried pointing you in the right direction. If it doesn't help, nobody else seems to want to.

I honestly can't answer your question, then. Reading through the first thread I posted, I'm going to say maybe but don't quote me on that.

 

I dont think anyone knows.... I used all of those threads to help me with my swap.

 

I've used those threads before too.

Try asking the Hybrid forum.