have a b18a nonvtec all motor with eagle rods srp 10.7:1 pistons crower 403's and i was wondering if i needed bigger injectors to reduce knock, or any other way to make my motor knock free. thanks for your help

 

sounds like it hasn't been tuned at all

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by chadwick67 &raquo;</TD></TR><TR><TD CLASS="quote"> have a b18a nonvtec all motor with eagle rods srp 10.7:1 pistons crower 403's and i was wondering if i needed bigger injectors to reduce knock, or any other way to make my motor knock free. thanks for your help</TD></TR></TABLE>

Stock injectors would work fine for that application.
It sounds like you need to dial in your ignition timing & fuel using an engine management system such as crome, hondata, ectune, neptune etc.

For more information read http://www.phearable.net/tech/....html

 

the motor actually isn't built yet, but i just wanted to make sure that when i start it i won't have any major problems

 

i would run stock injectors to drive to the tuner. and keep the revs low.
larger untuned will dump too much fuel which can mess up plenty more.