okay so i just got brand new axles... the passenger side fits just fine.. but on the driver side there is no gear comin from the axle that would go in the slot comin from the tranny?? wth? am i suppose to get 2 passenger side axles?? please let me kno what i don't kno thanks

 

be more specific

 

lets say the end of the axle for the driver side is the same as the end of the slot it goes into

 

The '94 and up drivers side axle should be male (splines on the outside) on the wheel end , and female on the tranny end (splines on the inside).The pre-94 are male in both ends (like the pass axle).If someone put an early intermediate shaft in it then you would need an early (male/male) drivers axle.