FS: PR3 head, pistons, fresh b18c1, etc.
Thread Starter
Junior Member
Joined: Nov 2003
Posts: 313
Likes: 0
From: 707
FS: PR3 head, pistons, fresh b18c1, etc.
going out of the honda scene so everything is for sale.
1988 integra ls- $2200obo
- stock d16
- about 100k
- new clutch
- B.A.R sticker for b-series
- converted to obd1 and will come with hondata s300
- lightspeed/koni suspension
- 15' rota c8
- magnaflow exhaust w/2.5' piping
- walbro fuel pump
PLX wideband- $280obo
- m300 wideband and controller
- used for 5k miles
fresh built 2000 B18C1- $1500obo
- all oem seals, rings, bearings, gaskets
- fresh hone
- complete longblock minus distributor
- exedy clutch
- resurfaced flywheel
- complete Intake Manifold not shown but will be included
- ill even include a dc header
PR3 head- $400obo
- complete with b17 cams
- no distributor
B17 shortblock- $400obo
- almost complete, has everything except pistons and rods
- rare, mass produced for less than 2 years
PR3 pistons/rods $100obo
- cleaned, no rings
Hasport mount kit AVB1- $750obo
- comes with rear bracket
- swap b-series into 86-89 integra
- includes wiring harness
rsx rear knuckles- $60ea. or $100 for both
rsx abs sensors- $60ea. or $200 for all 4
02-04 rsx type-s axleback- $50obo
Modified by 88da3 at 6:29 PM 11/15/2007
Modified by 88da3 at 12:29 AM 11/19/2007
1988 integra ls- $2200obo
- stock d16
- about 100k
- new clutch
- B.A.R sticker for b-series
- converted to obd1 and will come with hondata s300
- lightspeed/koni suspension
- 15' rota c8
- magnaflow exhaust w/2.5' piping
- walbro fuel pump
PLX wideband- $280obo
- m300 wideband and controller
- used for 5k miles
fresh built 2000 B18C1- $1500obo
- all oem seals, rings, bearings, gaskets
- fresh hone
- complete longblock minus distributor
- exedy clutch
- resurfaced flywheel
- complete Intake Manifold not shown but will be included
- ill even include a dc header
PR3 head- $400obo
- complete with b17 cams
- no distributor
B17 shortblock- $400obo
- almost complete, has everything except pistons and rods
- rare, mass produced for less than 2 years
PR3 pistons/rods $100obo
- cleaned, no rings
Hasport mount kit AVB1- $750obo
- comes with rear bracket
- swap b-series into 86-89 integra
- includes wiring harness
rsx rear knuckles- $60ea. or $100 for both
rsx abs sensors- $60ea. or $200 for all 4
02-04 rsx type-s axleback- $50obo
Modified by 88da3 at 6:29 PM 11/15/2007
Modified by 88da3 at 12:29 AM 11/19/2007
Trending Topics
Thread Starter
Junior Member
Joined: Nov 2003
Posts: 313
Likes: 0
From: 707
Re: (Eklsv-t)
0 miles on the motor since the rebuild. after the rebuild i swapped it into the teg and before finishing up the wire tuck decided to sell the car so i've gone back to stock and get out of the honda scene.