wanted exhaust shop in los angeles for some exhaust fab work
Thread Starter
Honda-Tech Member
Joined: Apr 2004
Posts: 1,394
Likes: 0
From: los angeles, ca, usa
wanted exhaust shop in los angeles for some exhaust fab work
does anybody know a good exhaust shop in los angeles area preferably in san gabriel valley area. i already have a muffler i just need a custom 3inch piping fab'd up. i need a shop w/ a good rep and good quality work and i'm not looking to spend alot.
if you have pics of the shop that made your exhaust please post up pics and location of the place. thank you.
if you have pics of the shop that made your exhaust please post up pics and location of the place. thank you.
GDD Lonely Krew
Joined: Feb 2005
Posts: 860
Likes: 2
From: Reseda, CA, USA
supertuning in van nuys. hes great and just did my sciroccos exhaust. full 2.5 inch mandrel bent piping fitted up to a 4-1 race header. hes the man in LA, bit if a drive for you but worth it.
Thread Starter
Honda-Tech Member
Joined: Apr 2004
Posts: 1,394
Likes: 0
From: los angeles, ca, usa
Re: (danielm3)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by danielm3 »</TD></TR><TR><TD CLASS="quote">I love honda-tech.com and the people on here:
"i need a shop w/ a good rep and good quality work and i'm not looking to spend alot."
Good luck.</TD></TR></TABLE>
well i don't want my exhaust to be all fucked up, i'm looking for good decent quality work at a low price. i'm pretty sure there are a few shops that fit this description.
"i need a shop w/ a good rep and good quality work and i'm not looking to spend alot."
Good luck.</TD></TR></TABLE>
well i don't want my exhaust to be all fucked up, i'm looking for good decent quality work at a low price. i'm pretty sure there are a few shops that fit this description.
Honda-Tech Member
Joined: Apr 2003
Posts: 5,365
Likes: 2
From: 60ft garage, CA, USA
Re: (HKSuperSi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HKSuperSi »</TD></TR><TR><TD CLASS="quote">
...i'm pretty sure there are a few shops that fit this description.</TD></TR></TABLE>
Not hardly.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by danielm3 »</TD></TR><TR><TD CLASS="quote">
Good luck.</TD></TR></TABLE>
...i'm pretty sure there are a few shops that fit this description.</TD></TR></TABLE>
Not hardly.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by danielm3 »</TD></TR><TR><TD CLASS="quote">
Good luck.</TD></TR></TABLE>
Honda-Tech Member
Joined: Apr 2003
Posts: 810
Likes: 0
From: LA, CA
Re: (the_unknown)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HKSuperSi »</TD></TR><TR><TD CLASS="quote">does anybody know a good exhaust shop in los angeles area preferably in san gabriel valley area. i already have a muffler i just need a custom 3inch piping fab'd up. i need a shop w/ a good rep and good quality work and i'm not looking to spend alot.
if you have pics of the shop that made your exhaust please post up pics and location of the place. thank you. </TD></TR></TABLE>
Can I ask how much you spent for the work?
if you have pics of the shop that made your exhaust please post up pics and location of the place. thank you. </TD></TR></TABLE>
Can I ask how much you spent for the work?
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Apr 2004
Posts: 1,394
Likes: 0
From: los angeles, ca, usa
Re: (EGPrelude)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EGPrelude »</TD></TR><TR><TD CLASS="quote">
Can I ask how much you spent for the work?</TD></TR></TABLE>
what do you mean. i haven't spent anything.
Can I ask how much you spent for the work?</TD></TR></TABLE>
what do you mean. i haven't spent anything.
Honda-Tech Member
Joined: Aug 2002
Posts: 929
Likes: 0
Re: (the_unknown)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by the_unknown »</TD></TR><TR><TD CLASS="quote">supertuning in van nuys. hes great and just did my sciroccos exhaust. full 2.5 inch mandrel bent piping fitted up to a 4-1 race header. hes the man in LA, bit if a drive for you but worth it.</TD></TR></TABLE>
SUPERTUNING
SUPERTUNING
Honda-Tech Member
Joined: Oct 2004
Posts: 567
Likes: 0
From: Pacoima, CA
Re: (HKSuperSi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HKSuperSi »</TD></TR><TR><TD CLASS="quote">jesus christ fine than people can someone recommend a good muffler shop no MATTER THE PRICE!!!!</TD></TR></TABLE>
I am in Pacoima, CA with my own mandrel bender. I can make what you are looking for, more than likely out of one tube with no welding pretty much, for about $500. I would have to look at it to tell you an exact price.
I am in Pacoima, CA with my own mandrel bender. I can make what you are looking for, more than likely out of one tube with no welding pretty much, for about $500. I would have to look at it to tell you an exact price.
Honda-Tech Member
Joined: Apr 2006
Posts: 622
Likes: 0
From: MESA, AZ, USA
Re: (danielm3)
for Daniel! Very Respectable person in our shop.We just did an Audi S4 custom turbo back exhaust.
$2900 total. Custom cost money. Plus, he was happy to pay that when he saw the finished product. Also, those are Mazzuri Super bends in there.
Honda-Tech Member
Joined: Jun 2003
Posts: 353
Likes: 0
From: Hilo, Hi
Re: (808DB1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 808DB1 »</TD></TR><TR><TD CLASS="quote">you smoking dope or what ? paying 2900$ for a exhaust , thats insane if you ask me </TD></TR></TABLE>
Thats because you have no clue as to what it takes to make an item like the one in the picture. Besides its an Audi not a HONDA.
Exhaust looks great guys.
Thats because you have no clue as to what it takes to make an item like the one in the picture. Besides its an Audi not a HONDA.
Exhaust looks great guys.
* B A N N E D *
Joined: Sep 2007
Posts: 590
Likes: 0
Re: (HKSuperSi)
LOL why would you come into welding/fab to ask this? most everyone here knows how to weld and will most likey advise you to DO IT YOURSELF
gasp!!!!!!!!!!!!!!!!!
you can work on cars yourself!!!!!??????????????
gasp!!!!!!!!!!!!!!!!!
you can work on cars yourself!!!!!??????????????
Honda-Tech Member
Joined: Apr 2006
Posts: 622
Likes: 0
From: MESA, AZ, USA
Thanks guys. The last exhaust for a civic we did ran about 600-700 total.
The audi required 2 downpipes, high end cats, flex pipes, vbands everywhere, and the turbo flanges were not a round port, but an upside down egg shaped port k03 flange.
The audi required 2 downpipes, high end cats, flex pipes, vbands everywhere, and the turbo flanges were not a round port, but an upside down egg shaped port k03 flange.
Honda-Tech Member
Joined: Aug 2004
Posts: 4,196
Likes: 0
From: Nah man, Yemen
Re: (TurboSI56)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboSI56 »</TD></TR><TR><TD CLASS="quote">I used to deal with mazurri alot good customer service, but it sucked that they dont do 1d bends 
</TD></TR></TABLE>
My friend's IS300 is Mazzuri's test mule for their products. First round stuff was shitty because he can't weld to save his life, but now that he's got a welder, that stuff's top-notch.
</TD></TR></TABLE>My friend's IS300 is Mazzuri's test mule for their products. First round stuff was shitty because he can't weld to save his life, but now that he's got a welder, that stuff's top-notch.
