Manifold i made for a friend. he wanted it up there to try and keep temperature down in the engine bay and the back of the car 'cause the intercooler is there.

it's all 316L accept for the flanges wich are mls.

 

i like the mounting on the ic are you going to run some shrouding to it?

 

i don't have any pictures of it, but yes there is a box that's ment to direct the air up and into the ic. the floor in the trunk is also lifted 3-4 inches.

 

nice! keep us updated on progress of this build. im an mr2 owner myself.

 

cool. whats the specs on the turbo?
and is the turbo going to stick up out the hood?

 

from the looks of it. it will stick out of the "engine lid" not hood. its a mid engine layout

 

Nice, but X2 on lid clearence.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BOOSTEd2 &raquo;</TD></TR><TR><TD CLASS="quote">from the looks of it. it will stick out of the "engine lid" not hood. its a mid engine layout</TD></TR></TABLE>

sorry i ment "lid"...

 

he is making a new engine lid. so the turbo will stay under that one but it would stick out if he didn't make a new lid. the new one will follow the cars profile, so the rear window view is lost. he's already made one lid for it but desided to make another one, but i'll se if i can get some pictures with the first one.

it's a precission gt35r turbo.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Lamchop0000 &raquo;</TD></TR><TR><TD CLASS="quote">

sorry i ment "lid"...</TD></TR></TABLE>

its ok you are forgiven....and its meant not ment...hahaha

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BOOSTEd2 &raquo;</TD></TR><TR><TD CLASS="quote">

its ok you are forgiven....and its meant not ment...hahaha</TD></TR></TABLE>
Jesus Christ...

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mh &raquo;</TD></TR><TR><TD CLASS="quote">he is making a new engine lid. so the turbo will stay under that one but it would stick out if he didn't make a new lid. the new one will follow the cars profile, so the rear window view is lost. he's already made one lid for it but desided to make another one, but i'll se if i can get some pictures with the first one.

it's a precission gt35r turbo.</TD></TR></TABLE>

Pics of the new Lid please!

 

have you thought about making a proper brace for that setup? I would

 

i'm making one. it will be a bolt one one. bolts to the head and bolts to the turbo flange.

 

interesting setup. I've got an MR2 and decided to go with an oversized A2W intercooler setup since I didn't want to hack a big hole in my trunk for a trunk mount. Very interesting choice on intercooler position.

I take it you're going to have to make a custom engine lid? There's no way that turbo is going to fit under the factory engine lid will it? Nice pics. I'm going to be doing some major surgery to the deuce over the winter.

Anyhow, very nice setup!

PS - what engine management system do you haver/ going with? I assume Nemesis or AEM EMS. I've got the AEM and really like the software interface.

-kl

 

different i like it alot

 

Thanks, not all my design i just made the turbomanifold and adapted the ic for the place it's mounted. I'll be making the intakemanifold inbetween some other stuff this winter. Just started on the ic piping from turbo to ic today, will finish it tomorrow.

more pictures.

 

looks somewhat like a blitz engine lid. except the blitz was see through.