CT: BUILT STROKER MOTOR FOR SALE! REBUILT B16 TRANNY!
Thread Starter
Honda-Tech Member
Joined: Jun 2003
Posts: 3,775
Likes: 0
From: Danbury, CT, 06804
CT: BUILT STROKER MOTOR FOR SALE! REBUILT B16 TRANNY!
I PUT MOST OF THE PARTS ON EBAY. HERE IS YOUR CHANCE TO GET SOME SWEET PARTS FOR NEXT TO NOTHING.
hey, i am trying to get rid of all of the big stuff at my house. here's a quick list of some goodies i have for sale.
1990 B18A1 LS Shortblock, Crower 95mm Crank, Crower Stroker Rods, Crower Spec JE Pistons, and ACL Bearings. I forget the exact piston displacement but if i remember right the pistons were about 10:1 c/r with the ls head so i think they are right around 0 cc. remember being that the motor is big displacement with a gsr head you are at almost 11:1. This shortblock has about 3k miles but i pulled it out because it smoked a bit. it wasn't too bad but it was an excuse to go higher compression, bigger pistons, and vtec. SOLD ON EBAY!
BUILT LS Head, Crower SS Valves, Ti Retainers, & Dual Springs. Asking $400, ebay winner backed out.
Crower 404 Cams, Crower Cam Gears, & OEM Timing belt. Asking $400.
Skunk 2 Intake manifold. Asking $150.
A Del Sol VTEC B16 Tranny with GSR final gears and differential. Asking $700. putting on ebay tomorrow.
I have a stock flywheel with brand new clutch and pressure plate i can sell with ether tranny for a few extra $$$.
Modified by JDMorgan at 8:36 PM 11/25/2007
hey, i am trying to get rid of all of the big stuff at my house. here's a quick list of some goodies i have for sale.
1990 B18A1 LS Shortblock, Crower 95mm Crank, Crower Stroker Rods, Crower Spec JE Pistons, and ACL Bearings. I forget the exact piston displacement but if i remember right the pistons were about 10:1 c/r with the ls head so i think they are right around 0 cc. remember being that the motor is big displacement with a gsr head you are at almost 11:1. This shortblock has about 3k miles but i pulled it out because it smoked a bit. it wasn't too bad but it was an excuse to go higher compression, bigger pistons, and vtec. SOLD ON EBAY!
BUILT LS Head, Crower SS Valves, Ti Retainers, & Dual Springs. Asking $400, ebay winner backed out.
Crower 404 Cams, Crower Cam Gears, & OEM Timing belt. Asking $400.
Skunk 2 Intake manifold. Asking $150.
A Del Sol VTEC B16 Tranny with GSR final gears and differential. Asking $700. putting on ebay tomorrow.
I have a stock flywheel with brand new clutch and pressure plate i can sell with ether tranny for a few extra $$$.
Modified by JDMorgan at 8:36 PM 11/25/2007
Trending Topics
Honda-Tech Member
iTrader: (1)
Joined: Aug 2006
Posts: 2,455
Likes: 0
From: Maryland. Dont come lookin
Re: (JDMorgan)
so ur trading dc2 gsr seats for them. which is good deal on both ur parts. so with knowing how much gsr seats are sold for which is like what ur paying for them. tell me a price
Joined: Apr 2007
Posts: 25
Likes: 0
From: Laporte, Indiana, United States
Re: CT: BUILT STROKER MOTOR FOR SALE! REBUILT B16 TRANNY! (JDMorgan)
Hey, my friend says he has the cash now for the bottom end or internals alone but he doesnt have a computer so im leaving the reply for him, he says to call him at 219-363-8373 he says he has the money now. thx names max
Joined: May 2006
Posts: 1,568
Likes: 1
From: MAZDASPEED, CT, USA
Re: CT: BUILT STROKER MOTOR FOR SALE! REBUILT B16 TRANNY! (JDMorgan)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMorgan »</TD></TR><TR><TD CLASS="quote">bump</TD></TR></TABLE>
stfu
stfu
Thread
Thread Starter
Forum
Replies
Last Post
dfoxengr
Tech / Misc
29
Jan 16, 2003 04:53 PM
