this is an xspower intercooler i made "backdoor" for my crx what do you guys think...i hope to only have 4 couplers... and i might put my bov flange on the cold side in the 4th pic. just thought i would share

let me know what you think

how i got it

how i got it

 

Not bad!

 

no one has any opinions?? i was wondering how efficent this would be..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by KidFrost &raquo;</TD></TR><TR><TD CLASS="quote">i was wondering how efficent this would be..</TD></TR></TABLE>

well air is going to move through it all the same....it isn't going to round the corner as well, but since the XS Power and other Ebay intercoolers are known for flowing faster and cooling less than a Precision or Garrett Core, you may have just brought it up to par. Since the air is going to slow down (barely i'm sure) it should cool more thoroughly...not to mention, when you reduce piping, you're spool time should increase.

 

aah i c ... and i have heard of putting the bov here


advantage? disadvantage?

 

Its a compromise.

More pressure drop as your changing the airs direction.

Better distribution of air accross the core.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DLO01 &raquo;</TD></TR><TR><TD CLASS="quote">Its a compromise.

More pressure drop as your changing the airs direction.

Better distribution of air accross the core <U>= more complete cooling of the air charge</U>.</TD></TR></TABLE>

I edited that for you

 

Thanks.

 

**** is hot, wut is the dimensiones on ur intercooler?

fix'd b/c pple r 2 god damn critical about ******* spelling!

WHO THE expletive CARES!!

u can understand what the expletive im saying.. soooo, stfu & blow me!


Modified by Swipe'd at 6:54 AM 9/18/2007

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Swipe’d &raquo;</TD></TR><TR><TD CLASS="quote">shitz hot wut is the demsionions on ur ic?</TD></TR></TABLE>

18X6.5X3.5 core


total only 24 inches long now

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Swipe’d &raquo;</TD></TR><TR><TD CLASS="quote">shitz hot wut is the demsionions on ur ic?</TD></TR></TABLE>

are you f'ng serious??? why the hell would you spell like that???
f'ng ricers...

i bet you gatz vtech yo!!!

anyways nice intercooler man. good welds also

 

He's probably doing it from his phone

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by joey1320 &raquo;</TD></TR><TR><TD CLASS="quote">

are you f'ng serious??? why the hell would you spell like that???
f'ng ricers...

i bet you gatz vtech yo!!!
</TD></TR></TABLE>

lol...i thought the same thing, but i tend to just ignore the retards on this site

 

i didnt know what his problem was maybe his phone but thanks for the props one the ic

i think it will fit in my crx good

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Schister66 &raquo;</TD></TR><TR><TD CLASS="quote">

lol...i thought the same thing, but i tend to just ignore the retards on this site </TD></TR></TABLE>

i can't anymore... i have sit patiently on the sidelines just reading posts by idiots who can't spell for **** and i'm tired of it... i think i need a break

and no i'm not a perfect speller, maybe since english is not my first language, but i try to get my message across without being a f'ing retard...

 

i know...we all get tired of idiots and people who start drama for no reason. In the Integra forum, this guy St. Jimmy started arguing w/ me after saying it was impossible to make 300+ whp on a stock GSR. I showed my graph and disproved it...he then went on to say that "turbos aren't stock"....i didnt even know what to say...like wtf?

check it out:
https://honda-tech.com/zerothread/2092986

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Schister66 &raquo;</TD></TR><TR><TD CLASS="quote">i know...we all get tired of idiots and people who start drama for no reason. In the Integra forum, this guy St. Jimmy started arguing w/ me after saying it was impossible to make 300+ whp on a stock GSR. I showed my graph and disproved it...he then went on to say that "turbos aren't stock"....i didnt even know what to say...like wtf?

check it out:
https://honda-tech.com/zerothread/2092986</TD></TR></TABLE>

haha man that was funny. i can't believe he tried to wiggle his way out a statement he had just made

at least you could read what he was saying...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by joey1320 &raquo;</TD></TR><TR><TD CLASS="quote">

haha man that was funny. i can't believe he tried to wiggle his way out a statement he had just made

at least you could read what he was saying... </TD></TR></TABLE>

sadly i could read what he was saying....not really a great thing in that instance. Feel free to chime in if you want to point out just how f**king dumb it really is...lol

back on topic, that IC looks nice...toss a tial 50mm on one of the end tanks and you'll have a low dollar kick-*** setup

 

which side would be better?? i cant really find that out for sure.... since i can pick what side i want it on i want to pick the "better" side... ive seen it on both sides and full race offers it on both idk j/w....

 

either will work fine, but if you put it on the cold side the air will be flowing at it so when it opens it should have an easier time escaping.

 

Nice job

 

Looks great

 

do you have to relocate your radiator inorder to fit your intercooler piping?

 

well i am going to run a aluminum half core so i have to make new mounting spots anyway so i am just going to be sure i have enough room on both sides....
essentually i will have both my radiator and my ic centered on the front of the car ... hopefully we will see.

 

Looks good, but that's a lot of work to make an ebay core something it's not going to be.