FULLY built B16 longblock. NEW in crate. 0 miles!!
Thread Starter
Junior Member
Joined: Apr 2002
Posts: 265
Likes: 0
From: NY
FULLY built B16 longblock. NEW in crate. 0 miles!!
EDIT: Motor for sale just as seen in pics. Price dropped to $5300 shipped! or $5000 pickup! 
This is a NEW longblock with 0 miles, it's still in the crate !!!
I had this motor built by Endyn, and was finally preparing to install it in my car along with a host of other goodies for FI, but my living situation has changed recently (and hence, finances changed...). I am (very) sadly being forced to sell this off and go with a 'simpler' setup for the time being.
The motor was completely built by Endyn. It's a B16 longblock, 85mm GE sleeved, and is built for Forced Induction. It is new, in the crate as I received it, with 0 miles. I am simply looking to sell everything now for LESS than what it cost me.
Block:
- B16 block, Golden Eagle Sleeved, 85mm
- Moroso Oil Pan + Pickup
- Z10 Block Girdle + GSR Main bolts, GSR Windage tray
- All new Honda bearings Main, Rod and Thrust
- Eagle Rods
- Endyn 85mm FI pistons, rings
- Cometic head gasket
- New Type-R oil pump, Endyn modded
- New Type-R harmonic balancer
- New timing belt, Water pump, Tensioner and spring
- One Endyn breather kit to go with the block (motor is built for dual breathers, as seen on valve cover)
- New misc. gaskets/seals
- ALL machine work and assembly done by Endyn, including bore, hone, line-honing, decking ect.
Cylinder Head:
- B16 head
- FULL headwork package done by Larry (includes: complete intake and exhaust port rework, combustion chamber work, chamber/quench opened to match larger bore, valve job, decking, and assembly with new Honda valve stem seals)
- Endyn flat-backed racing valves Intake and Exhaust, .5mm oversize, black nitride coated
- Eibach valve springs
- Crower titanium retainers
- EXTRA set of breather tubes added to valve cover (for a secondary breather tank)
- Endyn adjustable cam gears
- stock B16 cams (planned a cam upgrade at a later date IF the motor wanted more cam after break in and initial tuning with boost)
NOT INCLUDED: (this is just a straight longblock as seen in photos)
- manifolds
- distributor
- flywheel, clutch, ect.....
Asking price is $5300 shipped. FIRM (shipping will be Yellow freight to anywhere in the continental 48 states).
I think that about sums it up. This is now WELL below what it cost to build!!!
Please let me know if you have any questions, thanks!
-Chris Brandstrom-
Modified by ccjb100 at 7:00 PM 1/23/2008
Modified by ccjb100 at 7:01 PM 1/23/2008
This is a NEW longblock with 0 miles, it's still in the crate !!!
I had this motor built by Endyn, and was finally preparing to install it in my car along with a host of other goodies for FI, but my living situation has changed recently (and hence, finances changed...). I am (very) sadly being forced to sell this off and go with a 'simpler' setup for the time being.
The motor was completely built by Endyn. It's a B16 longblock, 85mm GE sleeved, and is built for Forced Induction. It is new, in the crate as I received it, with 0 miles. I am simply looking to sell everything now for LESS than what it cost me.
Block:
- B16 block, Golden Eagle Sleeved, 85mm
- Moroso Oil Pan + Pickup
- Z10 Block Girdle + GSR Main bolts, GSR Windage tray
- All new Honda bearings Main, Rod and Thrust
- Eagle Rods
- Endyn 85mm FI pistons, rings
- Cometic head gasket
- New Type-R oil pump, Endyn modded
- New Type-R harmonic balancer
- New timing belt, Water pump, Tensioner and spring
- One Endyn breather kit to go with the block (motor is built for dual breathers, as seen on valve cover)
- New misc. gaskets/seals
- ALL machine work and assembly done by Endyn, including bore, hone, line-honing, decking ect.
Cylinder Head:
- B16 head
- FULL headwork package done by Larry (includes: complete intake and exhaust port rework, combustion chamber work, chamber/quench opened to match larger bore, valve job, decking, and assembly with new Honda valve stem seals)
- Endyn flat-backed racing valves Intake and Exhaust, .5mm oversize, black nitride coated
- Eibach valve springs
- Crower titanium retainers
- EXTRA set of breather tubes added to valve cover (for a secondary breather tank)
- Endyn adjustable cam gears
- stock B16 cams (planned a cam upgrade at a later date IF the motor wanted more cam after break in and initial tuning with boost)
NOT INCLUDED: (this is just a straight longblock as seen in photos)
- manifolds
- distributor
- flywheel, clutch, ect.....
Asking price is $5300 shipped. FIRM (shipping will be Yellow freight to anywhere in the continental 48 states).
I think that about sums it up. This is now WELL below what it cost to build!!!
Please let me know if you have any questions, thanks!
-Chris Brandstrom-
Modified by ccjb100 at 7:00 PM 1/23/2008
Modified by ccjb100 at 7:01 PM 1/23/2008
Trending Topics
Thread Starter
Junior Member
Joined: Apr 2002
Posts: 265
Likes: 0
From: NY
Re: (NIKE SB'd)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NIKE SB’d »</TD></TR><TR><TD CLASS="quote">
OMG that's sick GL, definitely a good deal, problem is you've got a rather small market for something this nice. </TD></TR></TABLE>
Oh I know it! It's a tough sell. I've a had a lot of "I wish I had the money for that!" type comments. Just waiting for the right person to see it...or someone who knows the right person to pass along the link!
OMG that's sick GL, definitely a good deal, problem is you've got a rather small market for something this nice. </TD></TR></TABLE>Oh I know it! It's a tough sell. I've a had a lot of "I wish I had the money for that!" type comments. Just waiting for the right person to see it...or someone who knows the right person to pass along the link!
Re: FULLY built B16 longblock. NEW in crate. 0 miles!! (Mr.OB*GYN_Rhett)
it's not that we suck at completing projects,it's that certain unexpected things come up in life.if we knew what was coming,we would make the right plans for it so that we can continue with the project.g/l on sale
bump it ttt
bump it ttt
Re: FULLY built B16 longblock. NEW in crate. 0 miles!! (medjosh6)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by medjosh6 »</TD></TR><TR><TD CLASS="quote">it's not that we suck at completing projects,it's that certain unexpected things come up in life.if we knew what was coming,we would make the right plans for it so that we can continue with the project.g/l on sale
bump it ttt</TD></TR></TABLE>
you dont know if thats always the case
bump it ttt</TD></TR></TABLE>
you dont know if thats always the case