Taken from my build thread.

Ok, so i finally cracked open the B16 tranny to swap it into the LS case. But first, need to determine which tranny it is exactly so i can get new bearings.
GearSpeedEF7 instructed me to count the teeth. Here is what i came up with.



Starting with the left one (main shaft?) top to bottom:
32
29
24
19
12

The right one (counter shaft?) top to bottom:
29
32
34
39
39

Pinion has 15 and ring has 66= 4.400 final drive, correct?

So, if its just simple division, i get these ratios:

1st 3.25
2nd 2.052
3rd 1.416
4th 1.103
5th 0.906

edited......don't know what the hell this is a combination of. What's the deal? I counted each gear twice. I guess i'll go count again


EDIT*** uhh, is this possible, 3.25 is the majority of d-series' 1st gear????


Modified by turkishEF at 11:20 PM 9/6/2007

 

I've read up on about all i'm going to tonight. The best i came up with is Y1 2nd-4th and a d-series 1st gear??? Whatever. Going to bed.

 

Ok, just informed by GearSpeedEF7 that its a J1 tranny. None of the websites describing ratios for all the different cable b-series had these ratios though. I did find one today ,though, that says the Integra XSI (w/a J1) has the 3.25 first and .90 5th.

Interesting.