i was wondering how do i find the bearing sizes on my 1994 h22a? for both the rods and the crank thanks...

 

by buying a factory service manual



this is for main bearings. You need the 97 clearances.

 

https://honda-tech.com/zerothread?id=1232811

 

where would the color code be on the bearing ??? i took it off and i did not see any??

 

where would it be located? thanks

 

where do i find the letters and numbers on the crank and block for main and rod bearings where on the rods

thanks

 

http://www.helminc.com

 

anyone else that can actually help have some input

 

your crank hasnt been turned has it.

 

you read the numbers/letters on the crank, and block and rods etc, and then read the charts in the manual to determine what colors you need...assuming that your crank is 100% stock.
You need a manual though as it has pretty pictures and great wording for it.

 

That is helpful. If you plan to build an engine without the Helms manual, good luck. You'll need it.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civickiller &raquo;</TD></TR><TR><TD CLASS="quote">anyone else that can actually help have some input</TD></TR></TABLE>