i was recently in a little accident. my accord took alittle beating. i need to replace some front end stuff, which i can pretty much do, but the one thing that seems to be giving me alittle trouble is the radiator support. i would i go about removing it?

http://www.thehondapartsstore....ch=no

it is item #4 on the list.

 

there are spot welds that need drilled out. are you doing the whole thing or just the top piece? its a lot of drilling to get the whole thing out.

 

nevermind; i looked at the link you posted; you are doing the whole thing.
lots of spot welds to drill out! good luck

 

lots of spot welds those things suck wear gloves or else you'll have some nice burns. make sure to line everything up square

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IP RACING &raquo;</TD></TR><TR><TD CLASS="quote">lots of spot welds those things suck wear gloves or else you'll have some nice burns. make sure to line everything up square</TD></TR></TABLE>

thanks guys!