Broke the tens tonight...

Reaction: .5142
60': 1.6718
330': 4.6068
1/8: 6.9987
MPH: 102.05
1/4: 10.8297
MPH: 129.76

Not as quick as we wana run with this set up but not too bad for being the 3rd visit to the track w/ this car.

Thanks to Bobby @ Imports Plus for all the hook ups
and Thanks to kevin (projekteg) Imports Plus for keeping this thing running,

 

That's badass! what's the setup on this car if you don't mind me asking.

 

set up specs? good **** though...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slow96coupe &raquo;</TD></TR><TR><TD CLASS="quote">

1/4: 10.8297
MPH: 129.76

Not as quick as we wana run with this set up
</TD></TR></TABLE>

Hey, congrats on the new time. Welcome to the 10 second club..

Not to be a killjoy, but whats your setup consist of? Streetcar? HP? Weight?

I only ask because, judging by your mph and 60ft, im thinkin your ET and MPH are about "right"... Id say that, at most, you might be able to pick up another tenth or two.. Your 60ft definately wasnt bad, and your mph would indicate anywhere from 450hp-500hp (depending on the weight)

 

How about 9's on stock sleeves??

J/K...nice job.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boostedh22a &raquo;</TD></TR><TR><TD CLASS="quote">How about 9's on stock sleeves??

J/K...nice job.</TD></TR></TABLE>

9.40s?

 

http://videos.streetfire.net/v...2.htm

We are trying to run 10.50's... i know it wont get a lot faster but you gota have goal

Motor consists of Mahle 10-1 Pistons Eagle Rods and Comp springs/Retainers GT35r on 23PSI

 

good job man, i ran 140mph on stock sleeves with similar ETs. Its kind of nerve racking worrying about them all the time though.

 

Nice Job!!

I think Jason Hunt or Brian Ballard have been down in the 9's with a stock sleeved block but I could be wrong..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Adi Radoncic &raquo;</TD></TR><TR><TD CLASS="quote">Nice Job!!

I think Jason Hunt or Brian Ballard have been down in the 9's with a stock sleeved block but I could be wrong..</TD></TR></TABLE>

is that true???
if so what was the set-up?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SIXTYdashONE &raquo;</TD></TR><TR><TD CLASS="quote">

Not to be a killjoy, but whats your setup consist of? Streetcar? HP? Weight?
</TD></TR></TABLE>

It's a street car, Louis drives it to work every day.


Congrats again man. Glad to see it coming together for you.

 

great time dude!
iv just ran 9.93@147mph on stock sleaves and head.

 

I would think 23psi on a 35R should trap much faster than 129mph. what size wheels/tires and gearing are you using?

regardless 10s on stock sleeves is fun

 

24.5 hoosiers itr tranny.