Where to buy 2" Aluminum V-band flanges?

I have looked at a few places and no luck thus far. Anyone?

Thanks.

 

did you try youngsperformance.com?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Blown90hatcH &raquo;</TD></TR><TR><TD CLASS="quote">Where to buy 2" Aluminum V-band flanges?

I have looked at a few places and no luck thus far. Anyone?

Thanks.</TD></TR></TABLE>

hahahahahaa, i told you!!!!!!!!!!


find me some too homey, i know what youre up to !


Modified by mrbsponge at 6:46 PM 8/25/2007

 

They don't have it listed on their site. I will start calling around.

 

did you try vertex ? http://vertexnow.com/Verocious-Motorsports/V-Band

i see they only have down to 2.5inch listed, but it doesnt hurt to call and ask.

 

maybe the guys at SLS can make you some.

 

I will start calling some of these guys. Otherwise, I will just make some at work and be done with it if no one has them in stock.

 

I couldn't find anyone that had them so I just made some. I made a few extra too for rainy days. The AL one is on the left and the steel one is on the right.

 

very nice!, are these for exhaust use? if not you should cut o-ring grooves on a few of them.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ROTARY &raquo;</TD></TR><TR><TD CLASS="quote">very nice!, are these for exhaust use? if not you should cut o-ring grooves on a few of them.</TD></TR></TABLE>

These are for my wastegate dump tubes.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Blown90hatcH &raquo;</TD></TR><TR><TD CLASS="quote">

These are for my wastegate dump tubes.</TD></TR></TABLE>

i dont know why i didnt get one of these in the mail yet !!!!!

us slow guys only have one dumptube

 

Nice work

 

^ vibrant was mentioned post #5 but the size/material needed was unattainable.

 

Finished my dump tubes....

 

what does the rest of the setup look like ? didnt you sell the old t4 kit ?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DaveF &raquo;</TD></TR><TR><TD CLASS="quote">what does the rest of the setup look like ? didnt you sell the old t4 kit ? </TD></TR></TABLE> Forsure...

 

wow...that's an amazingly clean setup.


A++

 

nice ! how soon before it gets back on the track ?

 

is that an aluminum downpipe as well, looks good. what size w/g's are you using?

 

Curious to see how these hold up....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by denske &raquo;</TD></TR><TR><TD CLASS="quote">is that an aluminum downpipe as well, looks good. what size w/g's are you using?</TD></TR></TABLE>

being as they're v-banded...and tial is really popular... I'd say twin 44mm TiALs

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DaveF &raquo;</TD></TR><TR><TD CLASS="quote">nice ! how soon before it gets back on the track ?</TD></TR></TABLE>

Eh..would have been since but intercooler didn't get done in time so car is going to be down for a couple months until we move into the new house. I got another engineering job that I couldn't pass up but we have to move north. Hopefully before some snow hits the ground I will have some times on it. Otherwise, it will be completely ready SFWD trim come next season.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by denske &raquo;</TD></TR><TR><TD CLASS="quote">is that an aluminum downpipe as well, looks good. what size w/g's are you using?</TD></TR></TABLE>
4" AL downpipe too. The wastegates are tial 44s.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tepid1 &raquo;</TD></TR><TR><TD CLASS="quote">Curious to see how these hold up....</TD></TR></TABLE>
Me too especially since I drive this on the street all the time too. It's a game of trial and error when you try new things. IF they don't work, at least I tried I guess. My dumptubes weigh about 14 oz each..lol.

 

The streets is where most damage would occur.

What grade AL did you use for the down pipe and the dump tubes? What filler?