EDITED:

so new question, does an 1/8 npt port supply enough oil for a turbo feed line?


Modified by twkdCD595 at 8:32 AM 8/22/2007

 

EDITED:

see above please.


Modified by twkdCD595 at 8:33 AM 8/22/2007

 

sorry but I am going to bump this with a new question edited in the original post... I am just going to change to a GE adapter but will 1/8 npt be a good enough feed or should I adapt the boss port to -4an.

 

1/8npt is fine for oil feed. and im not sure but the greddy fittings may be 1/8bspt.

 

I figured it would be ok... thanks.

yep the greddy is a bspt... not npt... thanks to boostfed though I just bought a GE one and will throw the greddy on the shelf for a rainy day.

 

1/8 is more than fine and ryan alder said all his greddy's have 1/8 npt NOT bspt.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mike93eh2 &raquo;</TD></TR><TR><TD CLASS="quote">1/8 is more than fine and ryan alder said all his greddy's have 1/8 npt NOT bspt.</TD></TR></TABLE>

well I must have the only one, I checked the treads... definately bspt... but thats not my concern right now since something else just happened.

btw my adapter is a bit older one, has 2-1/8 BSPT ports and 1-m12x 1.25 port... I have checked it 3 times... I am not mistaken.