Ok first of all don't shoot me asking this question.
I see everybody gets a little bit aggroed when somebody asks for the 10000th time after a possible 1/4th time.

So i won't ask 1/4 times, but rather this:

What would the time be, accelerating 0-60Mph ...

1. Accord 96 Coupé F20B3 No mods : Simple, i got that one ... 10.3secs
2. same accord + H22a: ?
3. same accord +H22a+Aem cai+Head+exh: ?
4. same accord +H22a+Aem cai+Head+exh + a turbo setup: ?
5. same accord +H22a+Aem cai+Head+exh + a turbo setup + NOS: ?

Ok, i am not a race driver, just a regular driver, and its a manual.

Thx

David


Thx

David

 

If have a turbo setup you cannot have a header, you would have a turbo exhaust manifold.

 

alot of those times are gonna depend on what else is done to the motor...You cant just run a turbo setup on an H22 right from the door. You'll have to know what is done to the motor to make it handle boost....2nd, what size shot are you spraying? Assuming that you're using a 75 shot and pushing 8-10 lbs of boost, a rough estimation would be somewhere around 14 flat or high 13's.

 

With the motor swap the car should easily be low 7 maybe high 6 second 0 to 60. Intake, header and exhaust will shave maybe 2 or 3 tenths.
I dunno nothing about nitrous.

 

F20B3 huh? Where are you from?

 

Your saying an Accord with H22, i/e, turbo and a 75 shot will only run 14's? Wow, you are way off. Daves 92 with H22 and i/h/e will run low 14's. That setup should hit 12's with slicks.

 

I was just going to ask. Notice his spelling of 'coupe.'

 

Hehe,

i am from Belgium (Europe), F20B3 is a 2.0 SOHC non vtec engine with 136Pk.
Anyways, i got a company (Inter-tuning, one of the biggest tuners in europe) here that does a complete H22a swap for me for less then 3000$

I'll post pics when done ...

So no headers when turboing ... tell me about this exhaust manifold