Built B18c5, ITR head, S300, OBD2b OBD1, Precision 1000cc 750HP intercooler, AEM, perrin, greddy
I am selling a few things for a friend. His name on here is Rizen. If you have any questions, PM me or him.
First,
Built B18c5.
All clearances were checked and re-checked.
Darton 84MM Mid Kit
CP Pistons @ 9:1
Oliver Racing Rods
BRAND NEW ITR CRANK
2001 ITR head with REV aftermarket vavle train, stock ITR cams.
Every gasket was replaced.
New timing belt, water pump!!!!
The whole motor for 5300 or OBO
<FONT COLOR="red">OR</FONT>
$1000 for the head
$4500 for the short block



<FONT COLOR="blue">OBD2b to OBD1 harness:</FONT>
JUST HARNESS: 85 shipped


This ECU has boost control!
<FONT COLOR="blue">Perrin boost solenoid!!</FONT>
Works with Crome, ECtune, hondata. Better then the GM solenoid!!

$70 or obo!
<FONT COLOR="blue">AEM wideband!</FONT>
$200

The sensor is good, but threads are a bit chewed up.
<FONT COLOR="red">Clutch is an ACT Xtreme with 6 puck with 50 miles on it!</FONT>
$350 obo!
<FONT COLOR="blue">ITR Flywheel!</FONT>
$50obo, used, but in good condition
<FONT COLOR="blue">Aeromotive A1000 FPR</FONT>
$150, red and blue in color
<FONT COLOR="red">Defi D-Gauge Boost</FONT>
$100obo

<FONT COLOR="blue">Defi D-Gauge EGT</FONT>
$100obo

<FONT SIZE="3">SOLD!</FONT>
<FONT COLOR="red">Precision 1000CC Fuel Injectors!!</FONT>
<FONT COLOR="blue">Precision 750HP intercooler!!! AS1026</FONT>
<FONT COLOR="red">Endyn PCV catch can!!</FONT>
<FONT COLOR="red">Greddy type S boost controller </FONT>
<FONT COLOR="red">Aem fuelrail!</FONT>
S300
Modified by Turbogixxer at 12:34 PM 9/9/2007
First,
Built B18c5.
All clearances were checked and re-checked.
Darton 84MM Mid Kit
CP Pistons @ 9:1
Oliver Racing Rods
BRAND NEW ITR CRANK
2001 ITR head with REV aftermarket vavle train, stock ITR cams.
Every gasket was replaced.
New timing belt, water pump!!!!
The whole motor for 5300 or OBO
<FONT COLOR="red">OR</FONT>
$1000 for the head
$4500 for the short block



<FONT COLOR="blue">OBD2b to OBD1 harness:</FONT>
JUST HARNESS: 85 shipped


This ECU has boost control!
<FONT COLOR="blue">Perrin boost solenoid!!</FONT>
Works with Crome, ECtune, hondata. Better then the GM solenoid!!

$70 or obo!
<FONT COLOR="blue">AEM wideband!</FONT>
$200

The sensor is good, but threads are a bit chewed up.
<FONT COLOR="red">Clutch is an ACT Xtreme with 6 puck with 50 miles on it!</FONT>
$350 obo!
<FONT COLOR="blue">ITR Flywheel!</FONT>
$50obo, used, but in good condition
<FONT COLOR="blue">Aeromotive A1000 FPR</FONT>
$150, red and blue in color
<FONT COLOR="red">Defi D-Gauge Boost</FONT>
$100obo

<FONT COLOR="blue">Defi D-Gauge EGT</FONT>
$100obo

<FONT SIZE="3">SOLD!</FONT>
<FONT COLOR="red">Precision 1000CC Fuel Injectors!!</FONT>
<FONT COLOR="blue">Precision 750HP intercooler!!! AS1026</FONT>
<FONT COLOR="red">Endyn PCV catch can!!</FONT>
<FONT COLOR="red">Greddy type S boost controller </FONT>
<FONT COLOR="red">Aem fuelrail!</FONT>
S300
Modified by Turbogixxer at 12:34 PM 9/9/2007
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Turbogixxer »</TD></TR><TR><TD CLASS="quote">Neptune bump</TD></TR></TABLE>
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Turbogixxer »</TD></TR><TR><TD CLASS="quote">The head comes with what you see in the pictures minus the distributor.</TD></TR></TABLE>
And minus My sparkplug wires.
And minus My sparkplug wires.
bump.... sorry for the late reply. I'll let you know if i'm able to get the funds


