So i had to bring back to life a roller crx. Harness's were missing, hack and all the good stuff. So i get it to were i think today im going to put some juice through it to make sure nothing burns down. So i hook everything up turn the key and nothing so im like hm no power is even getting through. So i turn to key all the way and there was a little relay clicking. I dont have anything on my motor hook up IE dizzy, starter. So it wasnt going to fire. I found the relay and just clicks. So figured im getting some kind of power into the dash harness but nothing on the gauges or anything else.

I know its bold but anyone have any clues on where i can start. Maybe the hot wire that comes in so i can see where its bringing power into and not going.

 

What relay was it ?

 

Eh something small. That would have been good to know. It was more so in the middle of the dash harness. Lankyish.

 

Under the dash, in the center part, is that right ?

 

What in the ever loving phuk are you talking about? I would like to help, but don't have a clue what you want.

 

There is nothing really in the middle of the dash that would keep the car from not starting, relay wise that is. Sure you are getting good power, when you are getting weak power, from a ground or a bad wire, or bad battery, relays will click on and off cause there not getting enough power to stay opened or closed

 

I will have to check the battery. It was good last time i check. And to think of it that was a problem before with the mustang. I will put a charge on it and see. Go back over everything and make sure its grounded. Figured i ask. Plus i was bored.

And yes it was more so the middle. I dont have the dash on so it could belong somewhere else. But it come off by the gauge harness and went towards the pass side. None off the relays on the driver side by the fuse box.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SIred91 &raquo;</TD></TR><TR><TD CLASS="quote">What in the ever loving phuk are you talking about? I would like to help, but don't have a clue what you want.</TD></TR></TABLE>

Basically see if anyone ever had the same problem. Haha.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by duckmanEG &raquo;</TD></TR><TR><TD CLASS="quote">

Basically see if anyone ever had the same problem. Haha.</TD></TR></TABLE>

LOL, charge the battery alll the way up foist.

 

There is nothing over there really that would cause it not to get power to the starter, unless you are talking near the ignition switch

 

Wasnt trying to get power to the starter. I first wanted to just see if i can get power through out the car. Mainly to make sure the people before me didnt put something backwards and start on fire. I wasnt getting anything. O well.

Bob you have EF ecu pinout diagraph link, more so i can see what color and what not are on the harness side.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by duckmanEG &raquo;</TD></TR><TR><TD CLASS="quote">Wasnt trying to get power to the starter. I first wanted to just see if i can get power through out the car. Mainly to make sure the people before me didnt put something backwards and start on fire. I wasnt getting anything. O well.

Bob you have EF ecu pinout diagraph link.</TD></TR></TABLE>

I have the helms manual but its lacking that pin out, lacking any pin out really.

 

Damn. I need to find out what this one wire does. It was green with red stripe. But seem like the rywire harness wasnt even connected to it. The people before has mess with it so i was curious.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by duckmanEG &raquo;</TD></TR><TR><TD CLASS="quote">Damn. I need to find out what this one wire does. It was green with red stripe. But seem like the rywire harness wasnt even connected to it. The people before has mess with it so i was curious.</TD></TR></TABLE>

Near the ecu ? Go pick up a manual from autozone, they have all the pin outs in there, pretty good actually for some things, had to do it with my car.

 

I have one for my car. But it ******* sucks. Says that **** up to 91 but has alot of old ****. I will have to look at it again i guess.

 

I can send you the Honda Factory scematics if you like......lemme try to find em.....

PM me your e-mail

 

PM sent. I have this PDF file but it doesnt seem to be to great on the electrical side of things. Eh. I wish i had my camera with me. O well. I will have to bring kyle out with me one day. Im getting to the point where my regular honda knowledge is about to be limited because i didnt take the car apart and i dont know EF's hehe.

 

Noob
Just give it time, this one'll get scrapped like all the rest

 

Na this one isnt getting sold, traded at the moment. I am broke as expletive and cant even afford to buy another car right now. So right now im car less and need this one going. Whats brandons hourly rates going these days? Lots of fun wiring crap to deal with. Haha.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by duckmanEG &raquo;</TD></TR><TR><TD CLASS="quote">Na this one isnt getting sold, traded at the moment. I am broke as expletive and cant even afford to buy another car right now. So right now im car less and need this one going. Whats brandons hourly rates going these days? Lots of fun wiring crap to deal with. Haha.</TD></TR></TABLE>

Shouldn't it be duckmanEF, get on top of that noob, geez. Brandon does not work on wiring, its in his contract. I also can't test him for hgh, or any foreign substance.

 

Na. I dont want to change it. Plus i will have an EG one day again. Haha. ALso because if anything. I want just Duckman and someone has it but hasnt been on in years. I sent something to a mod before but got nothing back. Im not like, unlike some people i know cough cough.

Brandon only smokes weed, well because we all know weed is only for .............

 

Mexicans?

 

Um no silly. American Blacks. Hehe.

Also you know of anyone who is planning on selling a front bumper and support for a rex?

 

I have a minty support you can have, bumper you're on your own

 

Well i feel really stupid. After go through some things with my test light and volt meter i came to the conclusion i didnt have any engine grounds hook up. Yeah yeah yeah, rookie mistake. Guess thats what happens when you buy a roller messing lots of **** back in November and finally getting around to finishing it almost a year later. Just was giving a little heads up. Thanks Bob, My black token friend Brandon, and Sired.