usdm gsr piston on LS rods?
Thread Starter
Honda-Tech Member
Joined: Jan 2005
Posts: 486
Likes: 0
From: Honda Land
usdm gsr piston on LS rods?
Would it fit perfectly with no mod on the ls rods?
Could i get a 10.0 ratio with that on a LSV set up on B16 head?
I dont want more than 11.0 c/r.
Im sure someone have done this before so share your results.
Could i get a 10.0 ratio with that on a LSV set up on B16 head?
I dont want more than 11.0 c/r.
Im sure someone have done this before so share your results.
Honda-Tech Member
Joined: May 2000
Posts: 6,094
Likes: 6
From: PASADENA, CA, USA
Re: usdm gsr piston on LS rods? (girliehonda)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by girliehonda »</TD></TR><TR><TD CLASS="quote">Would it fit perfectly with no mod on the ls rods?
Could i get a 10.0 ratio with that on a LSV set up on B16 head?
I dont want more than 11.0 c/r.
Im sure someone have done this before so share your results.</TD></TR></TABLE>
yes GSR pistons will fit on an LS rod without mods.
Your compression will be low possibly right under 10.0, high 9's..
Could i get a 10.0 ratio with that on a LSV set up on B16 head?
I dont want more than 11.0 c/r.
Im sure someone have done this before so share your results.</TD></TR></TABLE>
yes GSR pistons will fit on an LS rod without mods.
Your compression will be low possibly right under 10.0, high 9's..
Thread
Thread Starter
Forum
Replies
Last Post
averyvm
All Motor / Naturally Aspirated
16
Feb 15, 2007 09:31 AM
