HEY WHAT UP GUYS IM IN NEED OF A 6PT. ROLL BAR TO BE WELDED IN...I WANNA KNOW WHO U GUYS USE AND WHOS REASONABLE..ALSO IF ANY ONE HAS DANNY'S NUMBER----> FROM PRO-MOD ...I'D REALLY APPRECIATE IT.....

THANKS IN ADVANCE!

 

I was in the same boat as you not too long ago. I even got ahold of danny which gave me a great price. But when I was ready to take my car he was no where to be found.

Not saying his work is bad, just was not able to get a hold of him.

I ended up going with Louie from L-con in placentia. Does some great work and lets you know whats going on.
(714)-366-1711 is his number! GL

 

THANKS BROTHER...I'VE HAD WORK DONE BY HIM AND HE DOES GREAT WORK FOR LOW COST BUT HIS # IS DISCONNECTED AND I CAN'T FIND A NEW NUMBER!....

 

http://www.uniquefabrication.com

 

also, There is Steen Chassis who is 1 of the best around here. You get what you pay for.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rip94delsol &raquo;</TD></TR><TR><TD CLASS="quote">also, There is Steen Chassis who is 1 of the best around here. You get what you pay for. </TD></TR></TABLE>

 

THAT IS TRUE BUT I THINK STEENS LIL OVERPRICED...BUT AMAZING WORK..

 

imho, i would do the full cage, you gonna regret getting a 6 point.

your car will need it soon anyhow.

 

in your sig it says you went 11.xx at 128. well 7mph faster and you need a cage certified for 8.50 or slower.

I think thats what my sticker says. 8.50 or slower certified!

 

Jerry from jerrybuilt makes them hit him up.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rip94delsol &raquo;</TD></TR><TR><TD CLASS="quote">in your sig it says you went 11.xx at 128. well 7mph faster and you need a cage certified for 8.50 or slower.

I think thats what my sticker says. 8.50 or slower certified!</TD></TR></TABLE>


I KNOW IM KINDA SCREWED..........

 

THANKS DAVE....CALLED JERRY GAVE AN AMAZING PRICE


JERRY BUILT

 

Steen Chassis for us. you get what you pay for. Safety is not something to skimp about.

 

L-Con race cars only place I'd trust my life to

http://www.l-con.net or 714-572-4130

 

very true but when it comes to regulations it doesnt matter. what matter's is the welds.

Basically most cage's are the same besides the halo bars and straight A-pillar bars, rear down bars to the frame rails or the strut mounts or even the strut mount bar.

They have the same designs basically, all your paying for is the welds and how close the bars get to the car.

 

that is very true...I've had work done with DANNY @ PRO-MOD and im very happy with his welds and fab work but..CANNOT FIND THE MAN...and I KNOW HOW MUCH supplies and labor should be on a cage so..when a shop throws out a price of 1800 dollars for a 6pt. roll bar....its just not realistic....IM JUST LOOKING for a fair price and good work...

THANKS GUYS FOR ALL UR INPUT AND REFERENCES !

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by finaltouchpro &raquo;</TD></TR><TR><TD CLASS="quote">THAT IS TRUE BUT I THINK STEENS LIL OVERPRICED... </TD></TR></TABLE>

When your doing a rollcage, try not to cut any corners.. You get what you pay for sir...

 

I WOULD NEVER CUT CORNERS ON A ITEM LIKE THAT BUT AS "RIPDELSOL" SAID...ITS THE WELDS AND HOW CLOSE THE CAGE IS TO THE ROOF DOORS ETC...A CAGE IS A CAGE(DESIGN WISE)...BUT U GOT THESE LITTLE KIDS RUNNIN SHOPS THAT ARE CHARGING OUTRAGEOUS PRICES FOR WORK...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by finaltouchpro &raquo;</TD></TR><TR><TD CLASS="quote">THAT IS TRUE BUT I THINK STEENS LIL OVERPRICED...BUT AMAZING WORK.. </TD></TR></TABLE>

STEEN CHASSIS !

Overpriced ?

look around and see who is using Steen Chassis. We are extremely happy with Gary's service and Knowledge. you need to make sure you have someone that knows the rules too!

Isnt your life worth anything? you get what you pay for!

 

STEEN CHASIS
You can't compare his work with anyone else's. Great service, Great guy

 

We went to Ron Lummus Racing. He can knock it out really quick, too. Best fab work I've seen around here. L Con is really good, too. Can't go wrong with either one.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by WOPCIVIC &raquo;</TD></TR><TR><TD CLASS="quote">STEEN CHASIS
You can't compare his work with anyone else's. Great service, Great guy </TD></TR></TABLE>

 

All Of our stuff is done at Steen Chassis. They do some of the best work and get it out quick. Gary and Jason are great guys. Gary does some of the best welding I have ever seen on many types of metal. I have seen him redo things on my own car that I said was ok and he was like naw I dont like. If it's worth doing it's worth doing right. And it is much cheaper to do it right the first time.

 

S&W mail order + $800 at Sears = 6pt roll bar, free welder.

 

Paralax,L-CON, Steen all Good...