FS/TW B16A block with crank
Thread Starter
Honda-Tech Member
Joined: Sep 2006
Posts: 826
Likes: 0
From: Ricerville, wi, US
FS/TW B16A block with crank
FS
JDM B16A Block with B16A2 Crank
Oil cooler
I have a 60K B16A2 oil pump and water pump included
water pipe
The block will needs to be machined. There are surface rust on the cylinder wall because my stupid buddy never oil the damn thing. The mains are off of my junk B16 because of a broken rod and there's a hoe in the block. It didn't have any when I got it. I have some Pr3 pistons that I can give with too.
Needs:
align bore
cylinder walls cleaned
and maybe decked
and well, a good wash.
then you have a beautifully flawless B16A Block.
Make offer
will email pic.
Modified by vtec4max at 5:49 PM 8/19/2007
JDM B16A Block with B16A2 Crank
Oil cooler
I have a 60K B16A2 oil pump and water pump included
water pipe
The block will needs to be machined. There are surface rust on the cylinder wall because my stupid buddy never oil the damn thing. The mains are off of my junk B16 because of a broken rod and there's a hoe in the block. It didn't have any when I got it. I have some Pr3 pistons that I can give with too.
Needs:
align bore
cylinder walls cleaned
and maybe decked
and well, a good wash.
then you have a beautifully flawless B16A Block.
Make offer
will email pic.
Modified by vtec4max at 5:49 PM 8/19/2007
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Sep 2006
Posts: 826
Likes: 0
From: Ricerville, wi, US
Re: (Import_spoon)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Import_spoon »</TD></TR><TR><TD CLASS="quote">Where are you located? If close I will make offer.</TD></TR></TABLE>
replied via IM....
replied via IM....
Thread
Thread Starter
Forum
Replies
Last Post
b18vtecboi
Southern California (Sales)
112
Jun 19, 2009 08:15 PM