WHEREATCO RACEWAY
1000 JACKSON ROAD
ATCO, NJ 08056

WHEN
SUNDAY, AUGUST 19, 2007

RACE DAY SCHEDULE
(Schedule Subject to Change w/o Notice)
Vendor Setup 9:00 AM
Gates Open 9:00 AM
Racer Tech Inspection 9:00 AM - 2:00 PM
Car Show Roll In 10:00 AM
Shakedown Runs (All Classes) 11:00 AM
Qualifying (All Classes) 12:30 PM, 2:00 PM
Car Show Judging 2:00 PM
1st Round Eliminations (Pro and Street) 3:00 PM
Finestmodels.com Swimsuit Competition 4:00 PM
Awards Presentation Conclusion

EVENT PRICING
Adult General Admission $20.00
Adult Crew Member $20.00
Children (7-11) $10.00
Kids (6-Younger) FREE
Race Entry (Car & Driver) $40.00
Carshow Entry (Car & Driver) $40.00
Fun Run (Car & Driver) $40.00

DIRECTIONS
From North Jersey and New York:
Take NJ Turnpike to Exit 7, Rt. 206. Take 206 south 15 miles to the Red Lion Circle, after the circle turn right at 2nd traffic light. Go to the 2nd street (Oakshade Road) and turn left. Go 6 miles to track.

From Philadelphia:
From Walt Whitman Bridge take 295 north to Exit 36A, Rt. 73 to Berlin Circle. After the circle go to second traffic light which 534. Take 534 east 3 miles to track. From Betsy Ross or Tacony/Palmayra bridge follow Rt. 73 to Berlin Circle. After the circle go to second traffic light which is 534. Take 534 east 3 miles to track.

From South Jersey and Delaware:
Take NJ Turnpike to Exit 4 or Rt. 295 north to Exit 36A. Take Rt. 73 south 10 miles to Berlin Circle, After the circle go to second traffic light which is 534. Take 534 east 3 miles to track.

From Shore Points:
Take exit 88 off Garden State Parkway,take Rt 70 West for 33 miles to Rt 206 circle, proceed for 2.3 miles on Rt 206,make a right at the second light ( Medford Lakes Road), go 2 blocks and make a left on Oakshade Rd, stay on Oakshade (RT534 West, for 7.3 miles and it will bring you right to the track.

 

I will be there, started up the crx this week

 

i know i wont be there ! my straight axle broke yesterday !! thank god it was not on the track .

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dturbocivic &raquo;</TD></TR><TR><TD CLASS="quote">i know i wont be there ! my straight axle broke yesterday !! thank god it was not on the track . </TD></TR></TABLE>

you suck dave. i was hoping to see the beast lol

 

i should change my name to "**** luck" because thats what i have !

 

we'll be there too.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dturbocivic &raquo;</TD></TR><TR><TD CLASS="quote">i know i wont be there ! my straight axle broke yesterday !! thank god it was not on the track . </TD></TR></TABLE>

wow. that explain the squirrelly ness?

depending on how i do saturday i may be there.

 

ill be there if jeff gets the car in for retune before then.

 

Maybe

 

boner, you are going to need more than 75 compression points !


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boostedcivicsir &raquo;</TD></TR><TR><TD CLASS="quote">

wow. that explain the squirrelly ness?
</TD></TR></TABLE>

i dont know, but i was just looking at it, and it appears as though the right side was about to tear off as well. the whole top around the weld just tore the metal right out, it actually tore 2 holes right into the straight axle tube.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dturbocivic &raquo;</TD></TR><TR><TD CLASS="quote">boner, you are going to need more than 75 compression points !
</TD></TR></TABLE>
Hopefully all fixed now 8 bent valves FTL. Slapping it back together right now and first thing I'm doing is a leakdown!

 

your putting a factory engine harness back in the car too, right?

 

Hope to be there for this 1

 

I'm going.

 

What are the classes and the rules? i cant seem to find them anywhere

 

Man, boti is really good at scheduling events on the same weekend as way bigger events...

...and they wonder why the stands are a ghost town at all of the boti events over here

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BoostedJeff &raquo;</TD></TR><TR><TD CLASS="quote">Man, boti is really good at scheduling events on the same weekend as way bigger events...

...and they wonder why the stands are a ghost town at all of the boti events over here</TD></TR></TABLE>

what else is going on in the East on this date? I planned to try to make this BOTI event at atco.

 

nhra indy

 

i migth also be their .....if i find a trailer to get me down their!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fmfkid250 &raquo;</TD></TR><TR><TD CLASS="quote">What are the classes and the rules? i cant seem to find them anywhere</TD></TR></TABLE>

there are 2-headsup pro classes offered, 4-headsup streetclasses, 2-dial in classes and a fun run class. you can download the pdf file for the rules directly from the website. if you have problems, send me an email directly at frank@battleoftheimports.com

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BoostedJeff &raquo;</TD></TR><TR><TD CLASS="quote">Man, boti is really good at scheduling events on the same weekend as way bigger events...

...and they wonder why the stands are a ghost town at all of the boti events over here</TD></TR></TABLE>

you have to understand that venues only have certain day(s) available on their respective calendars. nothing is ever planned intentionally on the same day(s). plus, indy is quite a drive from the local NJ areas.

 

I am looking forward to this weekend.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BOTI.com &raquo;</TD></TR><TR><TD CLASS="quote">

you have to understand that venues only have certain day(s) available on their respective calendars. nothing is ever planned intentionally on the same day(s). plus, indy is quite a drive from the local NJ areas.

</TD></TR></TABLE>

Yeah, I def understand what you mean.

Good luck to everyone!

 

would have loved to be there but ill be at indy. still hope theres a good turnout so battle comes to atco again next year!
-Roger

 

will try to make out with k-series on drag radials just to fool around not really that competitive.
tough to find some 15" slicks for 5 lug